3-氨甲基苯基硼酸频哪醇酯盐酸盐 | 380430-65-9

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 3-氨甲基苯基硼酸频哪醇酯盐酸盐
• 中文别名: 3-氨甲基苯硼酸；3-(氨甲基)苯硼酸频哪酯盐酸盐；3-(氨甲基)苯硼酸频哪醇酯盐酸盐
• 英文名称: 3-aminomethylphenylboronic acid pinacol ester hydrochloride
• 英文别名: (3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)methanamine hydrochloride；hydron;[3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]methanamine;chloride
• CAS: 380430-65-9
• 化学式: C₁₃H₂₀BNO₂*ClH
• 分子量: 269.579
• InChiKey: BZZYJHQGJDCCCZ-UHFFFAOYSA-N

物化性质

• 熔点：
  169-171°C

计算性质

• 辛醇/水分配系数(LogP)：
  -2.27
• 重原子数：
  18
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.54
• 拓扑面积：
  46.1
• 氢给体数：
  1
• 氢受体数：
  3

安全信息

• 危险类别码：
  R36/37/38
• 海关编码：
  2934999090
• 安全说明：
  S26,S36/37/39
• 危险标志：
  GHS07
• 危险性描述：
  H315,H319,H335
• 危险性防范说明：
  P261,P305 + P351 + P338

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 3-Aminomethylphenylboronic Acid, Pinacol Ester,
Hcl
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 269,58 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid
breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  3-氨甲基苯基硼酸频哪醇酯盐酸盐 在 palladium diacetate 、 potassium carbonate 、 三乙胺 、 2-二环己基磷-2,4,6-三异丙基联苯 作用下， 以 二氯甲烷 、 水 、 乙腈 为溶剂， 反应 3.0h， 生成 tert-butyl 6-[4-[2-(2-methoxyethoxy)phenyl]-3-[3-[(prop-2-enoylamino)methyl]phenyl]-6,7-dihydro-5H-cyclopenta[c]pyridin-1-yl]-3,4-dihydro-1H-isoquinoline-2-carboxylate
  参考文献：
  名称：

  WO2023/154282

  摘要：

  公开号：

文献信息

• [EN] 2-METHYL-QUINAZOLINES<br/>[FR] 2-MÉTHYL-QUINAZOLINES
  申请人：BAYER PHARMA AG

  公开号：WO2018172250A1

  公开（公告）日：2018-09-27

  The present invention describes 2-methyl-quinazoline compounds of general formula (I), methods of preparing said compounds, intermediate compounds useful for preparing said compounds, pharmaceutical compositions and combinations comprising said compounds, and the use of said compounds for manufacturing pharmaceutical compositions. The 2-methyl substituted quinazoline compounds of general formula(I) effectively and selectively inhibit the Ras-Sos interaction without significantly targeting the EGFR receptor. They are therefore useful for the treatment or prophylaxis of diseases, in particular of hyperproliferative disorders, such as cancer as a sole agent or in combination with other active ingredients.

  本发明描述了一般式(I)的2-甲基喹唑啉化合物，制备该化合物的方法，用于制备该化合物的中间体化合物，包含该化合物的药物组合物和组合物，以及用于制造药物组合物的该化合物的用途。一般式(I)的2-甲基取代喹唑啉化合物有效且选择性地抑制Ras-Sos相互作用，而不显著靶向EGFR受体。因此，它们对于治疗或预防疾病特别是高增殖性疾病，如癌症作为单一药剂或与其他活性成分组合使用是有用的。
• Kinase inhibitors
  申请人：Dong Qing

  公开号：US20060084650A1

  公开（公告）日：2006-04-20

  Compounds, pharmaceutical compositions and kits are provided for use with kinases that comprise a compound selected from the group consisting of: wherein the variables are as defined herein.

  提供用于与激酶结合的化合物、药物组合物和试剂盒，所述化合物是从以下组中选择的： 其中变量如本文所述定义。
• Enhanced copper-mediated ¹⁸F-fluorination of aryl boronic esters provides eight radiotracers for PET applications
  作者：Sean Preshlock、Samuel Calderwood、Stefan Verhoog、Matthew Tredwell、Mickael Huiban、Antje Hienzsch、Stefan Gruber、Thomas C. Wilson、Nicholas J. Taylor、Thomas Cailly、Michael Schedler、Thomas Lee Collier、Jan Passchier、René Smits、Jan Mollitor、Alexander Hoepping、Marco Mueller、Christophe Genicot、Joël Mercier、Véronique Gouverneur

  DOI：10.1039/c6cc03295h

  日期：——

  Eight clinically relevant radiotracers were isolated applying a Cu-mediated non-carrier added nucleophilic ¹⁸F-fluorination of arylboronic ester precursors.

  使用铜介导的非载体添加亲核性¹⁸F-氟化技术，从芳基硼酸酯前体中分离出了八种临床相关的放射性示踪剂。
• [EN] TRICYCLIC PYRI DO-CARBOXAM I D E DERIVATIVES AS ROCK INHIBITORS<br/>[FR] DÉRIVÉS PYRIDOCARBOXAMIDE TRICYCLIQUES COMME INHIBITEURS DE LA VOIE ROCK
  申请人：BRISTOL MYERS SQUIBB CO

  公开号：WO2015002915A1

  公开（公告）日：2015-01-08

  The present invention provides compounds of Formula (I): or stereoisomers, tautomers, or pharmaceutically acceptable salts thereof, wherein all the variables are as defined herein. These compounds are selective ROCK inhibitors. This invention also relates to pharmaceutical compositions comprising these compounds and methods of treating cardiovascular, smooth muscle, oncologic, neuropathologic, autoimmune, fibrotic, and/or inflammatory disorders using the same.

  本发明提供了化合物的结构式（I）：或其立体异构体、互变异构体或药用可接受的盐，其中所有变量均如本文所定义。这些化合物是选择性ROCK抑制剂。本发明还涉及含有这些化合物的药物组合物以及使用这些药物治疗心血管、平滑肌、肿瘤学、神经病理学、自身免疫、纤维化和/或炎症性疾病的方法。
• Histidine-Directed Arylation/Alkenylation of Backbone N–H Bonds Mediated by Copper(II)
  作者：Jun Ohata、Matthew B. Minus、Morgan E. Abernathy、Zachary T. Ball

  DOI：10.1021/jacs.6b03390

  日期：2016.6.22

  Chemical modification of proteins and peptides represents a challenge of reaction design as well as an important biological tool. In contrast to side-chain modification, synthetic methods to alter backbone structure are extremely limited. In this communication, copper-mediated backbone N-alkenylation or N-arylation of peptides and proteins by direct modification of natural sequences is described. Histidine

  蛋白质和肽的化学修饰是反应设计的挑战，也是重要的生物学工具。与侧链修饰相比，改变主链结构的合成方法极为有限。在此通讯中，描述了通过直接修饰天然序列，铜介导的主链 N-烯基化或 N-芳基化肽和蛋白质。组氨酸残基在相邻氨基酸的主链 NH 处直接氧化偶联硼酸。在环境温度下，普通生理缓冲液中的温和反应条件与蛋白质和生物系统兼容。这个简单的反应证明了在复杂系统中进行定向反应的潜力，可以修饰直接影响多肽结构、稳定性和功能的 NH 键。