4-哌嗪苯硼酸频那醇酯 | 912369-50-7

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 二嗪烷类
• 中文名称: 4-哌嗪苯硼酸频那醇酯
• 中文别名: 4-哌嗪基苯硼酸,频哪醇酯
• 英文名称: 1-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]piperazine
• 英文别名: 1-(4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)piperazine
• CAS: 912369-50-7
• 化学式: C₁₆H₂₅BN₂O₂
• 分子量: 288.198
• InChiKey: KARUXRFAVXKQFZ-UHFFFAOYSA-N

物化性质

• 沸点：
  432.7±30.0 °C(Predicted)
• 密度：
  1.08±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.4
• 重原子数：
  21
• 可旋转键数：
  2
• 环数：
  3.0
• sp3杂化的碳原子比例：
  0.62
• 拓扑面积：
  33.7
• 氢给体数：
  1
• 氢受体数：
  4

安全信息

• 海关编码：
  2934999090
• 危险性防范说明：
  P261,P280,P301+P312,P302+P352,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 4-Piperazinylphenylboronic Acid Pinacol Ester
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 288,2 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
No special environmental precautions required.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
No special environmental precautions required.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  4-哌嗪苯硼酸频那醇酯 在 二氯双[二叔丁基-(4-二甲基氨基苯基)膦]钯(II) 、 sodium carbonate 、 caesium carbonate 作用下， 以 1,4-二氧六环 、 水 、 乙腈 为溶剂， 反应 2.0h， 生成 2-(4-(4-(2-(3,5-dimethoxyphenylethyl)-5H-pyrrolo[2,3-b]pyrazin-6-yl)phenyl)piperazin-1-yl)ethanol trifluoroacetic acid
  参考文献：
  名称：

  PYRAZINE DERIVATIVES AS FGFR INHIBITORS

  摘要：

  本发明涉及吡啶衍生物和包括其在内的药物组合物，它们是一种或多种FGFR酶的抑制剂，并且在治疗FGFR相关疾病如癌症方面是有用的。

  公开号：

  US20140045814A1
• 作为产物：
  描述：

  1-Boc-4-(4-溴苯基)哌嗪 在 (1,1'-bis(diphenylphosphino)ferrocene)palladium(II) dichloride 、 三氟甲磺酸三甲基硅酯 、 potassium acetate 作用下， 以 1,4-二氧六环 、 二氯甲烷 为溶剂， 反应 3.0h， 生成 4-哌嗪苯硼酸频那醇酯
  参考文献：
  名称：

  COMPOUNDS AND METHODS FOR THE TARGETED DEGRADATION OF RAPIDLY ACCELERATED FIBROSARCOMA POLYPEPTIDES

  摘要：

  本公开涉及双功能化合物，其作为快速加速纤维肉瘤（RAF，如c-RAF、A-RAF和/或B-RAF；目标蛋白）的调节剂而发挥作用。具体而言，本公开涉及含有一端为Von Hippel-Lindau、cereblon、凋亡抑制蛋白或鼠双分子同源物2配体的双功能化合物，该配体与相应的E3泛素连接酶结合，并且另一端含有结合目标蛋白RAF的基团，使得目标蛋白与泛素连接酶靠近，以实现目标蛋白的降解（和抑制）。本公开展示了与目标蛋白的降解/抑制相关的广泛药理活性范围。本公开的化合物和组合物用于治疗或预防由目标蛋白的聚集或积累，或目标蛋白的构成性激活导致的疾病或紊乱。

  公开号：

  US20180179183A1
• 作为试剂：
  描述：

  β-羟基异戊酸 、 4-(6-(4,7-diazaspiro[2.5]octan-7-yl)pyridin-3-yl)-6-(1-methyl-1H-pyrazol-4-yl)pyrazolo[1,5-a]pyridine-3-carbonitrile dihydrochloride 在 4-哌嗪苯硼酸频那醇酯 、 N,N-二异丙基乙胺 作用下， 以 乙腈 为溶剂， 反应 48.0h， 以98%的产率得到4-(6-(4-(3-hydroxy-3-methylbutanoyl)-4,7-diazaspiro[2.5]octan-7-yl)pyridin-3-yl)-6-(1-methyl-1H-pyrazol-4-yl)pyrazolo[1,5-a]pyridine-3-carbonitrile
  参考文献：
  名称：

  [EN] SUBSTITUTED PYRAZOLO[1,5-A]PYRIDINE COMPOUNDS AS RET KINASE INHIBITORS
  [FR] COMPOSÉS SUBSTITUÉS DE PYRAZOLO[1,5-A]PYRIDINES COMME INHIBITEURS DE LA KINASE RET

  摘要：

  本文提供了一般式I的化合物及其立体异构体和药用可接受的盐或溶剂，其中A、B、D、E、X1、X2、X3和X4的含义如规范中所述，这些化合物是RET激酶的抑制剂，可用于治疗和预防可以用RET激酶抑制剂治疗的疾病，包括由RET激酶介导的疾病或紊乱。

  公开号：

  WO2017011776A1

文献信息

• [EN] TANK-BINDING KINASE INHIBITOR COMPOUNDS<br/>[FR] COMPOSÉS INHIBITEURS DE KINASES SE LIANT À TANK
  申请人：GILEAD SCIENCES INC

  公开号：WO2015187684A1

  公开（公告）日：2015-12-10

  Compounds having the following formula (I) and methods of their use and preparation are disclosed:

  揭示了具有以下化学式（I）的化合物及其使用和制备方法。
• SUBSTITUTED PYRIDOPYRAZINES AS NOVEL SYK INHIBITORS
  申请人：Su Wei-Guo

  公开号：US20140121200A1

  公开（公告）日：2014-05-01

  Provided are pyridopyrazine compounds of formula (1), pharmaceutical compositions thereof and methods of use therefore, wherein R 1 , R 2 , R 3 , R 4 and m are as defined in the specification.

  提供了式（1）的吡啶吡嗪化合物，以及其药物组合物和使用方法，其中R1、R2、R3、R4和m如规范中所定义。
• Structure-based design, synthesis, and evaluation of inhibitors with high selectivity for PARP-1 over PARP-2
  作者：Jiang Yu、Lingling Luo、Tong Hu、Yating Cui、Xiao Sun、Wenfeng Gou、Wenbin Hou、Yiliang Li、Tiemin Sun

  DOI：10.1016/j.ejmech.2021.113898

  日期：2022.1

  polymerase (PARP) inhibitors play a crucial role in cancer therapy. However, most approved PARP inhibitors have lower selectivity to PARP-1 than to PARP-2, so they will inevitably have side effects. Based on the different catalytic domains of PARP-1 and PARP-2, we developed a strategy to design and synthesize highly selective PARP-1 inhibitors. Compounds Y17, Y29, Y31 and Y49 showed excellent PARP-1 inhibition

  聚 (ADP-核糖) 聚合酶 (PARP) 抑制剂在癌症治疗中起着至关重要的作用。然而，大多数已获批准的 PARP 抑制剂对 PARP-1 的选择性低于对 PARP-2 的选择性，因此它们不可避免地会产生副作用。基于 PARP-1 和 PARP-2 的不同催化结构域，我们开发了一种设计和合成高选择性 PARP-1 抑制剂的策略。化合物Y17、Y29、Y31和Y49表现出优异的PARP-1抑制作用，其IC 50值分别为0.61、0.66、0.41和0.96 nM。然后，Y49（PARP-1 IC 50  = 0.96 nM，PARP-2 IC 50 = 61.90 nM，选择性 PARP-2/PARP-1 = 64.5) 被证明是最具选择性的 PARP-1 抑制剂。化合物Y29和Y49对 BRCA1 突变 MX-1 细胞的增殖抑制作用比其他癌细胞更强。在 MDA-MB-436 异种移植模型中
• COMPOUNDS AND METHODS FOR THE TARGETED DEGRADATION OF RAPIDLY ACCELERATED FIBROSARCOMA POLYPEPTIDES
  申请人：Arvinas, Inc.

  公开号：US20180179183A1

  公开（公告）日：2018-06-28

  The present disclosure relates to bifunctional compounds, which find utility as modulators of Rapidly Accelerated Fibrosarcoma (RAF, such as c-RAF, A-RAF and/or B-RAF; the target protein). In particular, the present disclosure is directed to bifunctional compounds, which contain on one end a Von Hippel-Lindau, cereblon, Inhibitors of Apotosis Proteins or mouse double-minute homolog 2 ligand which binds to the respective E3 ubiquitin ligase and on the other end a moiety which binds the target protein RAF, such that the target protein is placed in proximity to the ubiquitin ligase to effect degradation (and inhibition) of target protein. The present disclosure exhibits a broad range of pharmacological activities associated with degradation/inhibition of target protein. Diseases or disorders that result from aggregation or accumulation of the target protein, or the constitutive activation of the target protein, are treated or prevented with compounds and compositions of the present disclosure.

  本公开涉及双功能化合物，其作为快速加速纤维肉瘤（RAF，如c-RAF、A-RAF和/或B-RAF；目标蛋白）的调节剂而发挥作用。具体而言，本公开涉及含有一端为Von Hippel-Lindau、cereblon、凋亡抑制蛋白或鼠双分子同源物2配体的双功能化合物，该配体与相应的E3泛素连接酶结合，并且另一端含有结合目标蛋白RAF的基团，使得目标蛋白与泛素连接酶靠近，以实现目标蛋白的降解（和抑制）。本公开展示了与目标蛋白的降解/抑制相关的广泛药理活性范围。本公开的化合物和组合物用于治疗或预防由目标蛋白的聚集或积累，或目标蛋白的构成性激活导致的疾病或紊乱。
• [EN] BICYCLIC FUSED PYRIMIDINE COMPOUNDS AS TAM INHIBITORS<br/>[FR] COMPOSÉS DE PYRIMIDINE FUSIONNÉS BICYCLIQUES UTILISÉS EN TANT QU'INHIBITEURS DE TAM
  申请人：INCYTE CORP

  公开号：WO2017027717A1

  公开（公告）日：2017-02-16

  This application relates to compounds of Formula I: or pharmaceutically acceptable salts thereof, which are inhibitors of TAM kinases which are useful for the treatment of disorders such as cancer.

  这项申请涉及公式I的化合物：或其药用盐，这些化合物是TAM激酶的抑制剂，可用于治疗癌症等疾病。