A-nor-5α-ergostanone-(2) | 122242-11-9

• 分子结构分类: 有机化合物 - 脂质和类脂质分子 - 类固醇和类固醇衍生物
• 英文名称: A-nor-5α-ergostanone-(2)
• 英文别名: A-nor-5α-ergostanone-(2)；A-Nor-5α-ergostanon-(2)
• CAS: 122242-11-9
• 化学式: C₂₇H₄₆O
• 分子量: 386.662
• InChiKey: KMZCZDTWCIOQNC-VGQORISRSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  7.53
• 重原子数：
  28.0
• 可旋转键数：
  5.0
• 环数：
  4.0
• sp3杂化的碳原子比例：
  0.96
• 拓扑面积：
  17.07
• 氢给体数：
  0.0
• 氢受体数：
  1.0

反应信息

• 作为反应物：
  描述：

  A-nor-5α-ergostanone-(2) 生成 A-nor-5α-ergostanone-(2)-oxime
  参考文献：
  名称：

  Thrust-Washer Evaluation of Self-Lubricating PS304 Composite Coatings in High Temperature Sliding Contact

  摘要：

  PS304 self-lubricating composite coatings were successfully deposited on steel substrates at various plasma spray facilities using mixtures blended from commercially obtained constituent particles. Coatings were evaluated in thrust-washer tests against Inconel X-750 at low contact pressures to 40kPa, sliding speed of 5.4m/s, and either ambient temperature or 500 degreesC chosen to simulate conditions in air foil bearings during startup and shutdown contact. Wear factors for all PS304 coatings tested, regardless of contact pressure and temperature, ranged from 1-3*10(-4) mm(3)/Nm while coefficients of friction of approximately mu = 0.5 were measured in all cases. While wear and friction behavior of PS304 in air foil bearings appear to have been simulated, surface roughening was observed in these thrust-washer tests which used continuous sliding contact, as opposed to the evolution of smoother surfaces observed in high-temperature foil bearings experiencing cyclic startup/shutdown. Wear-induced surface smoothening of PS304 was additionally simulated in thrust-washer tests with sliding contact instead imposed intermittently.

  DOI：

  10.1080/10402000208982579
• 作为产物：
  描述：

  (3beta,5alpha)-麦角甾烷-3-醇 在 chromium(VI) oxide 、 溶剂黄146 作用下， 生成 A-nor-5α-ergostanone-(2)
  参考文献：
  名称：

  Thrust-Washer Evaluation of Self-Lubricating PS304 Composite Coatings in High Temperature Sliding Contact

  摘要：

  PS304 self-lubricating composite coatings were successfully deposited on steel substrates at various plasma spray facilities using mixtures blended from commercially obtained constituent particles. Coatings were evaluated in thrust-washer tests against Inconel X-750 at low contact pressures to 40kPa, sliding speed of 5.4m/s, and either ambient temperature or 500 degreesC chosen to simulate conditions in air foil bearings during startup and shutdown contact. Wear factors for all PS304 coatings tested, regardless of contact pressure and temperature, ranged from 1-3*10(-4) mm(3)/Nm while coefficients of friction of approximately mu = 0.5 were measured in all cases. While wear and friction behavior of PS304 in air foil bearings appear to have been simulated, surface roughening was observed in these thrust-washer tests which used continuous sliding contact, as opposed to the evolution of smoother surfaces observed in high-temperature foil bearings experiencing cyclic startup/shutdown. Wear-induced surface smoothening of PS304 was additionally simulated in thrust-washer tests with sliding contact instead imposed intermittently.

  DOI：

  10.1080/10402000208982579