1-[2-(2,5-二甲基-1H-吡咯-1-基)乙基]哌啶 | 5059-36-9

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 二嗪烷类
• 中文名称: 1-[2-(2,5-二甲基-1H-吡咯-1-基)乙基]哌啶
• 中文别名: 1-[2-(2,5-二甲基-1H-吡咯-1-基)乙基]哌嗪
• 英文名称: N-<β-2,5-dimethyl-1-pyrrolyl)ethyl>piperazine
• 英文别名: 1-[2-(2,5-dimethyl-1H-pyrrol-1-yl)ethyl]piperazine；1-[2-(2,5-dimethylpyrrol-1-yl)ethyl]piperazine
• CAS: 5059-36-9
• 化学式: C₁₂H₂₁N₃
• mdl: MFCD03407319
• 分子量: 207.319
• InChiKey: AUSXFRFXXDHSTC-UHFFFAOYSA-N

物化性质

• 沸点：
  177-178 °C(Press: 17 Torr)
• 密度：
  1.07±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.8
• 重原子数：
  15
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.666
• 拓扑面积：
  20.2
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 危险等级：
  IRRITANT
• 危险品标志：
  Xi
• 安全说明：
  S26,S36/37/39,S45
• 危险类别码：
  R34
• 海关编码：
  2933990090

SDS

Name:	1-[2-(2 5-Dimethyl-1h-pyrrol-1-yl)ethyl]piperazine 90+% Material Safety Data Sheet
Synonym:
CAS:	5059-36-9

Section 1 - Chemical Product MSDS Name:1-[2-(2 5-Dimethyl-1h-pyrrol-1-yl)ethyl]piperazine 90+% Material Safety Data Sheet
Synonym:

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
5059-36-9	1-[2-(2,5-Dimethyl-1H-pyrrol-1-yl)ethy	90+%	unlisted

Hazard Symbols: C
Risk Phrases: 34

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

---

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container.

---

Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 5059-36-9: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Oil
Color: pale yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H21N3
Molecular Weight: 207.32

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Has not been reported

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 5059-36-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-[2-(2,5-Dimethyl-1H-pyrrol-1-yl)ethyl]piperazine - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5059-36-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5059-36-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5059-36-9 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-[2-(2,5-二甲基-1H-吡咯-1-基)乙基]哌啶 以 甲苯 为溶剂， 反应 11.0h， 生成 N-benzimidazolylmethyl-N'-<β-2,5-dimethyl-1-pyrrolyl)ethyl>piperazine
  参考文献：
  名称：

  N-（Β-氨基乙基）哌嗪及其衍生物的反应

  摘要：

  DOI：

  10.1007/bf00474237
• 作为产物：
  描述：

  N-氨乙基哌嗪 、 2,5-己二酮 在 silica gel supported p-toluenesulfonic acid 作用下， 以56.4%的产率得到1-[2-(2,5-二甲基-1H-吡咯-1-基)乙基]哌啶
  参考文献：
  名称：

  Discovery and optimisation studies of antimalarial phenotypic hits

  摘要：

  There is an urgent need for the development of new antimalarial compounds. As a result of a phenotypic screen, several compounds with potent activity against the parasite Plasmodium falciparum were identified. Characterization of these compounds is discussed, along with approaches to optimise the physicochemical properties. The in vitro antimalarial activity of these compounds against P. falciparum K1 had EC50 values in the range of 0.09-29 mu M, and generally good selectivity (typically >100-fold) compared to a mammalian cell line (L6). One example showed no significant activity against a rodent model of malaria, and more work is needed to optimise these compounds. (C) 2015 The Authors. Published by Elsevier Masson SAS.

  DOI：

  10.1016/j.ejmech.2015.08.044

文献信息

• [EN] SULFONYLATED TETRAHYDROAZOLOPYRAZINES AND THEIR USE AS MEDICINAL PRODUCTS<br/>[FR] TÉTRAHYDROAZOLOPYRAZINES SULFONYLÉES ET LEUR UTILISATION EN TANT QUE PRODUITS MÉDICAMENTEUX
  申请人：GRUENENTHAL GMBH

  公开号：WO2010099938A1

  公开（公告）日：2010-09-10

  The present invention relates to sulfonylated tetrahydroazolopyrazines, methods for the preparation thereof, medicinal products containing these compounds and the use of substituted indole compounds for the preparation of medicinal products (Formula I).

  本发明涉及磺酰化四氢咯啉吡嗪，其制备方法，含有这些化合物的药物产品以及用于制备药物产品的取代吲哚化合物的使用（式I）。
• Synthesis and biological evaluation of a triazole-based library of pyrido[2,3-d]pyrimidines as FGFR3 tyrosine kinase inhibitors
  作者：Laurent Le Corre、Anne-Lise Girard、Johannes Aubertin、François Radvanyi、Catherine Benoist-Lasselin、Aurélie Jonquoy、Emilie Mugniery、Laurence Legeai-Mallet、Patricia Busca、Yves Le Merrer

  DOI：10.1039/b923882d

  日期：——

  A library of pyrido[2,3-d]pyrimidines was designed as inhibitors of FGFR3 tyrosine kinase allowing possible interactions with an unexploited region of the ATP binding-site. This library was built-up with an efficient step of click-chemistry giving easy access to triazole-based compounds bearing a large panel of substituents. Among the 27 analogues synthesized, more than half exhibited 55–89% inhibition of in vitro FGFR3 kinase activity at 2 μM and one (19g) was able to inhibit auto-phosphorylation of mutant FGFR3-K650M in transfected HEK cells.

  设计了一系列吡啶并[2,3-d]嘧啶类化合物作为FGFR3酪氨酸激酶的抑制剂，这些化合物可能与ATP结合位点的一个未开发区域发生相互作用。该化合物库通过高效的点击化学步骤构建，便于合成含有多种取代基的三唑类化合物。在合成的27个类似物中，超过一半的化合物在2微摩尔浓度下对体外FGFR3激酶活性表现出55-89%的抑制作用，其中一个化合物（19g）能够抑制转染HEK细胞中突变型FGFR3-K650M的自磷酸化。
• Sulfonylated Tetrahydroazolopyrazines and their Use as Pharmaceuticals
  申请人：MERLA Beatrix

  公开号：US20100234387A1

  公开（公告）日：2010-09-16

  Sulfonylated tetrahydroazolopyrazine compounds corresponding to the formula I wherein R 1 , R 2a , R 2b , R 3a , R 3b , R 4 , R 8 , R 9a , R 9b , R 10 , R 11 , A, B, W 1 , W 2 and W 3 have the meanings defined herein, pharmaceutical compositions containing such compounds, a method for the preparation of such compounds, and the use of such compounds for treating or inhibiting various types of pain and/or other conditions mediated at least in part by the bradykinin 1 receptor (B1R).

  公式I对应的是磺酰化四氢咪唑吡嗪化合物，其中R1、R2a、R2b、R3a、R3b、R4、R8、R9a、R9b、R10、R11、A、B、W1、W2和W3的含义如下所定义，该类化合物的制备方法、含有该类化合物的药物组合物以及利用该类化合物治疗或抑制至少部分由激肽1受体（B1R）介导的各种疼痛和/或其他疾病的用途。
• Chemical mechanical planarization for tungsten-containing substrates
  申请人：AIR PRODUCTS AND CHEMICALS, INC.

  公开号：EP2779217A2

  公开（公告）日：2014-09-17

  Chemical mechanical polishing (CMP) compositions for polishing tungsten or tungsten-containing substrates comprise an abrasive, at least one solid catalyst, a chemical additive selected from the groups consisting of piperazine derivatives, salts of cyanate, and combinations thereof; and a liquid carrier. Systems and processes use the aqueous formulations for polishing tungsten or tungsten-containing substrates.

  用于抛光钨或含钨基材的化学机械抛光（CMP）组合物包括磨料、至少一种固体催化剂、一种选自哌嗪衍生物、氰酸盐及其组合的化学添加剂；以及一种液体载体。系统和工艺使用水性制剂抛光钨或含钨基材。
• Synthesis of alkali and heavy metal dithio- and thiocarbamates based on N-(?-aminoethyl)piperazine
  作者：R. N. Zagidullin

  DOI：10.1007/bf00481523

  日期：1989.11