1-叔丁氧羰基-4-(吗啉-4-羰基)哌啶 | 757949-39-6

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 哌啶类
• 中文名称: 1-叔丁氧羰基-4-(吗啉-4-羰基)哌啶
• 英文名称: tert-butyl 4-(morpholine-4-carbonyl)piperidine-1-carboxylate
• 英文别名: 1-Boc-4-(morpholine-4-carbonyl)piperidine
• CAS: 757949-39-6
• 化学式: C₁₅H₂₆N₂O₄
• mdl: MFCD07776587
• 分子量: 298.382
• InChiKey: HJJYSHCBPPLTRG-UHFFFAOYSA-N

物化性质

• 沸点：
  444.8±45.0 °C(Predicted)
• 密度：
  1.145±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.7
• 重原子数：
  21
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.87
• 拓扑面积：
  59.1
• 氢给体数：
  0
• 氢受体数：
  4

安全信息

• 海关编码：
  2934999090
• 储存条件：
  存储条件：2-8°C，干燥且密封。

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 1-Boc-4-(morpholine-4-carbonyl)piperidine
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 1-Boc-4-(morpholine-4-carbonyl)piperidine
CAS number: 757949-39-6

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C15H26N2O4
Molecular weight: 298.4

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-叔丁氧羰基-4-(吗啉-4-羰基)哌啶 在 盐酸 作用下， 以 甲醇 为溶剂， 反应 16.0h， 以300 mg的产率得到吗琳基(4-哌啶)甲酮 盐酸盐
  参考文献：
  名称：

  [EN] COMPOUNDS AND USES THEREOF
  [FR] COMPOSÉS ET UTILISATIONS DE CES DERNIERS

  摘要：

  本发明涉及对神经系统疾病治疗中有用的化合物。本发明的化合物，单独或与其他药用活性剂结合，可用于治疗或预防神经系统疾病。

  公开号：

  WO2018081167A1
• 作为产物：
  描述：

  1-Boc-4-哌啶甲酸 在 modified Mukaiyama reagent 、 N,N-二异丙基乙胺 作用下， 以 四氢呋喃 为溶剂， 反应 0.58h， 生成 1-叔丁氧羰基-4-(吗啉-4-羰基)哌啶
  参考文献：
  名称：

  Fluorous 2-chloropyridinium salt (Mukaiyama condensation reagent) for amide formation reactions

  摘要：

  A new fluorous 2-chloropyridinium hexafluorophosphate was prepared as a modified Mukaiyama condensation reagent, and it was applied in amide formation reactions. Good to excellent purities of amides were obtained after fluorous solid-phase extraction of reaction mixtures without additional chromatography. (c) 2005 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.tetlet.2005.07.072

文献信息

• Direct Amidation of Esters by Ball Milling**
  作者：William I. Nicholson、Fabien Barreteau、Jamie A. Leitch、Riley Payne、Ian Priestley、Edouard Godineau、Claudio Battilocchio、Duncan L. Browne

  DOI：10.1002/anie.202106412

  日期：2021.9.27

  The direct mechanochemical amidation of esters by ball milling is described. The operationally simple procedure requires an ester, an amine, and substoichiometric KOtBu and was used to prepare a large and diverse library of 78 amide structures with modest to excellent efficiency. Heteroaromatic and heterocyclic components are specifically shown to be amenable to this mechanochemical protocol. This

  描述了通过球磨对酯进行直接机械化学酰胺化。操作简单的程序需要一种酯、一种胺和亚化学计量的 KOtBu，并被用于制备一个包含 78 个酰胺结构的大型和多样化的库，效率适中至极好。杂芳族和杂环组分特别表明适合这种机械化学协议。这种直接合成平台已应用于活性药物成分 (API) 和农用化学品的合成以及活性药物的克级合成，所有这些都在没有反应溶剂的情况下进行。
• Tandem Photoredox Catalysis: Enabling Carbonylative Amidation of Aryl and Alkylhalides
  作者：José A. Forni、Nenad Micic、Timothy U. Connell、Geethika Weragoda、Anastasios Polyzos

  DOI：10.1002/anie.202006720

  日期：2020.10.12

  visible‐light‐mediated carbonylative amidation of aryl, heteroaryl, and alkyl halides. A tandem catalytic cycle of [Ir(ppy)2(dtb‐bpy)]+ generates a potent iridium photoreductant through a second catalytic cycle in the presence of DIPEA, which productively engages aryl bromides, iodides, and even chlorides as well as primary, secondary, and tertiary alkyl iodides. The versatile in situ generated catalyst is compatible

  我们报告了一种新的可见光介导的芳基，杂芳基和烷基卤化物的羰基酰胺化反应。串联的[Ir（ppy）2（dtb-bpy）] +催化循环在DIPEA存在的情况下通过第二个催化循环产生强力的铱光还原剂，该反应性地使芳基溴化物，碘化物，甚至氯化物与伯，仲和叔烷基碘。这种多功能的原位生成的催化剂可与脂族和芳族胺兼容，具有很高的官能团耐受性，并能使复杂的天然产物后期酰胺化。
• Generation of Mixed Anhydrides via Oxidative Fragmentation of Tertiary Cyclopropanols with Phenyliodine(III) Dicarboxylates
  作者：Dzmitry M. Zubrytski、Gábor Zoltán Elek、Margus Lopp、Dzmitry G. Kananovich

  DOI：10.3390/molecules26010140

  日期：——

  sulfur-centered nucleophiles (primary and secondary amines, hydroxylamines, primary alcohols, phenols, thiols). Intramolecular acylation yielding macrocyclic lactones can also be performed. The developed transformation has bolstered the synthetic utility of cyclopropanols as pluripotent intermediates in diversity-oriented synthesis of bioactive natural products and their synthetic congeners. For example,

  在非质子溶剂（二氯甲烷、氯仿、甲苯）中，叔环丙醇与二羧酸苯碘 (III) 的氧化裂解产生混合酸酐。使用带有吸电子羧酸配体（三氟乙酰、2,4,6-三氯苯甲酰基、3-硝基苯甲酰基）的苯碘（III）试剂时，裂解反应特别容易，相应混合酸酐产物的产率为 95-98%。后者可以直接应用于各种以氮、氧和硫为中心的亲核试剂（伯胺和仲胺、羟胺、伯醇、酚、硫醇）的酰化。也可以进行产生大环内酯的分子内酰化。所开发的转化增强了环丙醇作为多能中间体在生物活性天然产物及其合成同源物的多样性导向合成中的合成效用。例如，它成功应用于环肽的最后阶段修饰，以产生已知的组蛋白脱乙酰酶抑制剂的前体。
• TBAT-Catalyzed Deoxygenative Reduction of Tertiary Amides to Amines
  作者：Vinothkumar Vinayagam、Subir Kumar Sadhukhan、Satish Kumar Karre、Ravuri Srinath、Ravi Kumar Maroju、Purushotham Reddy Karra、Hema Sundar Naveen Babu Bathula、Siva Kundrapu、Srikanth Reddy Surukonti

  DOI：10.1021/acs.orglett.3c01150

  日期：2023.6.30

  developed to convert amides to amines. This protocol uses a stable tetrabutylammonium difluorotriphenylsilicate in combination with silanes that generates a highly reactive hydrosilicate species, which enables the reduction of a broad range of amides to amines in moderate to good yields. The attractive features of this protocol include operational simplicity, safety, short reaction times, room temperature

  开发了一种简单、温和、无金属的催化方案，将酰胺转化为胺。该方案使用稳定的二氟三苯基硅酸四丁基铵与硅烷结合，产生高反应性的氢硅酸盐物质，从而能够以中等至良好的产率将多种酰胺还原为胺。该协议的吸引人的特点包括操作简单、安全、反应时间短、室温反应、底物范围广泛且易于放大。
• [EN] OXAMIDE DERIVATIVES, PREPARATION METHOD THEREFOR AND USE THEREOF IN MEDICINE<br/>[FR] DÉRIVÉS D'OXAMIDE, LEUR PROCÉDÉ DE PRÉPARATION ET LEUR UTILISATION EN MÉDECINE<br/>[ZH] 草酰胺类衍生物、其制备方法及其在医药上的应用
  申请人：SHENZHEN SALUBRIS PHARM CO LTD

  公开号：WO2021110076A1

  公开（公告）日：2021-06-10

  属于化学药物技术领域，涉及草酰胺类衍生物、其制备方法及其在医药上的应用。具体而言，提供式(I)的化合物或其立体异构体、互变异构体、药学上可接受的盐。这些化合物是选择性因子XIa(Factor XIa，简称FXIa)的抑制剂，还涉及包含这些化合物的药物组合物以及使用该化合物治疗血栓栓塞等疾病的药物中的用途。