diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)silane | 356056-14-9

• 分子结构分类: 有机化合物 - 有机盐 - 有机金属盐
• 英文名称: diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)silane
• 英文别名: diisopropyl-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)silane；(3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 8-Tridecafluorooctyl)diisopropylsilane；3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyldiisopropylsilane；Diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)silane；di(propan-2-yl)-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)silane
• CAS: 356056-14-9
• 化学式: C₁₄H₁₉F₁₃Si
• 分子量: 462.37
• InChiKey: VIGKXSZWCIUYJE-UHFFFAOYSA-N

物化性质

• 沸点：
  250.3±40.0 °C(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  7.16
• 重原子数：
  28
• 可旋转键数：
  9
• 环数：
  0.0
• sp3杂化的碳原子比例：
  1.0
• 拓扑面积：
  0
• 氢给体数：
  0
• 氢受体数：
  13

安全信息

• 危险品标志：
  Xi
• 海关编码：
  2931900090
• 危险标志：
  GHS07
• 危险性描述：
  H315,H319,H335
• 危险性防范说明：
  P261,P305 + P351 + P338

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : Diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-
tridecafluorooctyl)silane
CAS-No. : 356056-14-9
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38 Irritating to eyes, respiratory system and skin.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37 Wear suitable protective clothing and gloves.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms : Diisopropyl-(1H,1H,2H,2H-perfluorooctyl)silane
Formula : C14H19F13Si
Molecular Weight : 462,37 g/mol
Component Concentration
Diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)silane
CAS-No. 356056-14-9 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen fluoride, silicon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: liquid
Colour: colourless
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. Causes respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. Causes skin irritation.
Eyes Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

---

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)silane 在 4-二甲氨基吡啶 甲醇 、 锂硼氢 、 溴 、 三乙胺 作用下， 以 四氢呋喃 、 乙醚 、 二氯甲烷 为溶剂， 反应 14.0h， 生成 (S)-2-[diisopropyl-(3,3,4,4,5,5,6,6,7,7,8,8-tridecafluorooctyl)silanyloxymethyl]butan-1-ol
  参考文献：
  名称：

  拟外消旋合成：使用氟标记策略制备吡啶多菌素和马匹辛的对映异构体的概念和实施

  摘要：

  介绍了准外消旋合成的概念，并通过吡啶多菌素（其绝对构型指定为 R）和麦匹辛的两种对映异构体的合成进行了说明。与外消旋合成一样，准外消旋合成在单一合成序列中提供两种对映异构体；然而，分离标记用于确保准外消旋混合物可以按需分析、分离和识别。不同链长的氟标签用于标记两种对映体起始材料。将所得准对映体混合以制备准外消旋物，然后在合成的连续步骤中将其像真正的外消旋物一样处理。氟色谱法用于将最终的准外消旋物分离或分层为两种组分，然后将其分离以提供（真正的）对映体产品。

  DOI：

  10.1021/ja025606x
• 作为产物：
  描述：

  1-碘-1H,1H,2H,2H-全氟辛烷 、 二异丙基氯代硅烷 在 叔丁基锂 作用下， 以 正戊烷 为溶剂， 以99%的产率得到diisopropyl(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)silane
  参考文献：
  名称：

  拟外消旋合成：使用氟标记策略制备吡啶多菌素和马匹辛的对映异构体的概念和实施

  摘要：

  介绍了准外消旋合成的概念，并通过吡啶多菌素（其绝对构型指定为 R）和麦匹辛的两种对映异构体的合成进行了说明。与外消旋合成一样，准外消旋合成在单一合成序列中提供两种对映异构体；然而，分离标记用于确保准外消旋混合物可以按需分析、分离和识别。不同链长的氟标签用于标记两种对映体起始材料。将所得准对映体混合以制备准外消旋物，然后在合成的连续步骤中将其像真正的外消旋物一样处理。氟色谱法用于将最终的准外消旋物分离或分层为两种组分，然后将其分离以提供（真正的）对映体产品。

  DOI：

  10.1021/ja025606x

文献信息

• [EN] FLUORINATED SILYLETHYNYL PENTACENE COMPOUNDS AND COMPOSITIONS AND METHODS OF MAKING AND USING THE SAME<br/>[FR] COMPOSÉS ET COMPOSITIONS DE PENTACÈNE DE SILYLÉTHYNYLE FLUORÉ ET LEURS PROCÉDÉS DE PRÉPARATION ET D'UTILISATION
  申请人：3M INNOVATIVE PROPERTIES CO

  公开号：WO2010138807A1

  公开（公告）日：2010-12-02

  Fluorinated silylethynyl pentacenes and compositions containing fluorinated silylethynyl pentacenes are disclosed. Methods of making and using fluorinated silylethynyl pentacenes and compositions containing fluorinated silylethynyl pentacenes are also disclosed.

  本文揭示了氟硅基乙炔基五环戊二烯和含有氟硅基乙炔基五环戊二烯的组合物。还公开了制备和使用氟硅基乙炔基五环戊二烯以及含有氟硅基乙炔基五环戊二烯的组合物的方法。
• Structure Assignment of Lagunapyrone B by Fluorous Mixture Synthesis of Four Candidate Stereoisomers
  作者：Fanglong Yang、Jeffery J. Newsome、Dennis P. Curran

  DOI：10.1021/ja064812s

  日期：2006.11.1

  Techniques of fluorous mixture synthesis have been used to make four candidate stereoisomers for the natural product lagunapyrone B. A quasiracemic mixture of vinyl iodides whose component configurations at C19-21 were encoded by fluorous silyl groups was fused to a central fragment by a Negishi coupling. A separate quasiracemic mixture of pyrone fragments whose component configurations at C6,7 were

  含氟混合物合成技术已用于制备天然产物拉格纳派隆 B 的四种候选立体异构体。其 C19-21 的组分构型由含氟甲硅烷基编码的乙烯基碘类准外消旋混合物通过 Negishi 偶联与中心片段融合。合成并分层了单独的吡喃酮片段的准外消旋混合物，其 C6,7 处的组分配置也由含氟甲硅烷基编码。所得纯准对映异构体与准外消旋混合物的Stille偶联提供两个准非对映异构体样品，将其分层并去标签以提供所有四种lagunapyrone B立体异构体。通过旋光度比较，Lagunapyrone 被指定为 6R、7S、19S、20S、21R 构型。
• Solution-Phase Preparation of a 560-Compound Library of Individual Pure Mappicine Analogues by Fluorous Mixture Synthesis
  作者：Wei Zhang、Zhiyong Luo、Christine Hiu-Tung Chen、Dennis P. Curran

  DOI：10.1021/ja026947d

  日期：2002.9.1

  series of fluorous tags of different chain lengths. The tagged starting materials are then mixed and taken through a multistep reaction process. Fluorous chromatography is used to demix the tagged product mixtures on the basis of the fluorine content of the tags to provide the individual pure components of the mixture, which are detagged to release the final products. The utility of fluorous mixture synthesis

  溶液相混合物合成具有效率优势和有利的反应动力学。然而，由于使用传统的分离和鉴定过程难以获得单独的、纯的最终产品，这种技术的应用受到了阻碍。这里介绍的是一种解决分离和识别问题的混合物合成新策略。一系列有机底物的成员与一系列不同链长的氟标签配对。然后将标记的起始材料混合并通过多步反应过程。氟色谱法用于根据标签的氟含量对带标签的产品混合物进行分层，以提供混合物的各个纯组分，这些组分被分离以释放最终产品。含氟混合物合成的效用通过天然产物 mappicine 的 560 元类似物库的制备得到证明。七组分混合物通过四步混合物合成（两个一锅法和两个平行步骤）进行，以将两个额外的多样性点合并到四环核心上。建立了中间体的分析和纯化方法，以控制混合物合成的质量。
• Fluorous Mixture Synthesis of (−)-Dictyostatin and Three Stereoisomers
  作者：Yoshikazu Fukui、Arndt M. Brückner、Youseung Shin、Raghavan Balachandran、Billy W. Day、Dennis P. Curran

  DOI：10.1021/ol0526827

  日期：2006.1.1

  [reaction: see text] A mixture of four stereoisomers whose configurations are encoded by fluorous silyl protecting groups has been prepared and converted over 22 steps to a mixture of protected dictyostatins. Demixing by fluorous HPLC followed by removal of the fluorous protecting groups (detagging) provides dictyostatin and three C6,C7 stereoisomers. Biological evaluation showed that the monoepimers

  [反应：见正文]制备了四种立体异构体的混合物，其构型由氟甲硅烷基保护基团编码，并经过22步转化为受保护的dictyostatins的混合物。通过氟HPLC分离，然后除去氟保护基（脱标签），提供了dictyostatin和三种C6，C7立体异构体。生物学评估表明，天然产物的单表位分子保留了高度有效的活性。
• Fluorous Mixture Synthesis of Four Stereoisomers of the C21-C40 Fragment of Tetrafibricin
  作者：Dennis Curran、Kai Zhang

  DOI：10.1055/s-0029-1219376

  日期：2010.3

  Four stereoisomers of the C21-C40 fragment are synthesized in a single exercise with the aid of fluorous tagging to encode configurations at C37 and C33. After demixing and detagging, the isomers were found to have substantially identical (1)H NMR spectra. However, there were some small but reliable differences in their (13)C NMR spectra.

  C21-C40 片段的四种立体异构体在一次练习中合成，借助氟标记在 C37 和 C33 处编码构型。在分层和去标签后，发现异构体具有基本相同的 (1) H NMR 谱。然而，它们的 (13)C NMR 光谱存在一些微小但可靠的差异。