三丁基(1-丙烯-2-基)锡 | 100073-15-2

• 物质功能分类: 化学试剂 - 有机试剂 - 烯烃（环状与无环状）
• 分子结构分类: 有机化合物 - 有机金属化合物 - 有机过渡后金属化合物
• 中文名称: 三丁基(1-丙烯-2-基)锡
• 中文别名: 5-乙烯基-嘧啶-2-胺
• 英文名称: tributyl(prop-1-en-2-yl)stannane
• 英文别名: tributyl(isopropenyl)stannane；isopropenyltributyltin；2-(tributylstannyl)propene；tributyl(isopropenyl)tin
• CAS: 100073-15-2
• 化学式: C₁₅H₃₂Sn
• 分子量: 331.129
• InChiKey: PUMSLVXNEXVCIC-UHFFFAOYSA-N

物化性质

• 熔点：
  70-70°C / 0.1
• 沸点：
  312.0±25.0 °C(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  5.95
• 重原子数：
  16
• 可旋转键数：
  10
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.87
• 拓扑面积：
  0
• 氢给体数：
  0
• 氢受体数：
  0

安全信息

• 海关编码：
  2931900090
• 储存条件：
  2～8℃

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2-(Tributylstannyl)propene
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 100073-15-2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Label elements
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
: Tributyl(isopropenyl)stannane
Synonyms
Formula : C15H32Sn
Molecular weight : 331,12 g/mol
CAS-No. : 100073-15-2
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Tin/tin oxides
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
No special environmental precautions required.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
No special environmental precautions required.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  (E)-4-iodo-3-methylbut-3-en-1-ol 、 三丁基(1-丙烯-2-基)锡 在 copper(l) iodide 、 四(三苯基膦)钯 、 cesium fluoride 作用下， 以 四氢呋喃 为溶剂， 反应 10.0h， 以56%的产率得到(3E)-3,5-dimethylhexa-3,5-dien-1-ol
  参考文献：
  名称：

  A novel non-metathetic behavior of Grubbs catalyst: Ruthenium-mediated intramolecular [3 + 2] cycloaddition of bis-1,3-dienes

  摘要：

  A ruthenium-mediated intramolecular [3 + 2] cycloaddition of bis-1,3-dienes to give bicyclic products, which is a novel non-metathetic behavior of Grubbs catalyst, is reported. The formation of a ruthenium-olefin complex is proposed to be a key step for the success of the reaction. (C) 2012 Elsevier B.V. All rights reserved.

  DOI：

  10.1016/j.jorganchem.2012.09.004
• 作为产物：
  描述：

  2-tributylstannylpropyl N-phenylcarbamate 以 gas 为溶剂， 以50%的产率得到三丁基(1-丙烯-2-基)锡
  参考文献：
  名称：

  Ratier, Max; Khatmi, Djamel; Duboudin, Jean-Georges, Bulletin des Societes Chimiques Belges, 1991, vol. 100, # 6, p. 467 - 482

  摘要：

  DOI：
• 作为试剂：
  描述：

  在 四(三苯基膦)钯 、 三丁基(1-丙烯-2-基)锡 、 copper(l) chloride 、 lithium chloride 作用下， 以 二甲基亚砜 为溶剂， 反应 1.83h， 以79%的产率得到
  参考文献：
  名称：

  (±)-Tricholomalides A 和 B 的全合成和结构修正

  摘要：

  神经营养性二萜类化合物，tricholomalides A 和 B，以简洁的方式合成。关键转化包括乙烯酮 [2 + 2] 环加成和格氏型反应。在合成过程中，确定了tricholomalides A和B的结构最初是错误的。

  DOI：

  10.1021/ja9049433

文献信息

• Amino-substituted heterocycles, compositions thereof, and methods of treatment therewith
  申请人：D'Sidocky Neil R.

  公开号：US20080242694A1

  公开（公告）日：2008-10-02

  Provided herein are Heterocyclic Compounds having the following structure: wherein R 1 , R 2 , X, Y and Z are as defined herein, compositions comprising an effective amount of a Heterocyclic Compound and methods for treating or preventing cancer, inflammatory conditions, immunological conditions, metabolic conditions and conditions treatable or preventable by inhibition of a kinase pathway comprising administering an effective amount of a Heterocyclic Compound to a patient in need thereof.

  本文提供具有以下结构的杂环化合物： 其中R1、R2、X、Y和Z如本文所定义，包含有效量杂环化合物的组合物，以及治疗或预防癌症、炎症性疾病、免疫疾病、代谢性疾病以及通过给予患者需要的有效量杂环化合物来抑制激酶途径治疗或预防的疾病的方法。
• [EN] TETRACYCLIC HETEROCYCLE COMPOUNDS AND METHODS OF USE THEREOF FOR THE TREATMENT OF HEPATITIS C<br/>[FR] COMPOSÉS HÉTÉROCYCLIQUES TÉTRACYCLIQUES ET LEURS PROCÉDÉS D'UTILISATION POUR LE TRAITEMENT DE L'HÉPATITE C
  申请人：MERCK SHARP & DOHME

  公开号：WO2014121416A1

  公开（公告）日：2014-08-14

  The present invention relates to compounds of formula (I) that are useful as hepatitis C virus (HCV) NS5B polymerase inhibitors, the synthesis of such compounds, and the use of such compounds for inhibiting HCV NS5B polymerase activity, for treating or preventing HCV infections and for inhibiting HCV viral replication and/or viral production in a cell-based system.

  本发明涉及式(I)化合物，该化合物可用作丙型肝炎病毒（HCV）NS5B聚合酶抑制剂，此类化合物的合成，以及使用此类化合物来抑制HCV NS5B聚合酶活性，治疗或预防HCV感染，以及在细胞系统中抑制HCV病毒复制和/或病毒产生。
• [EN] LIPIDS AND LIPID COMPOSITIONS FOR THE DELIVERY OF ACTIVE AGENTS<br/>[FR] LIPIDES ET COMPOSITIONS LIPIDIQUES POUR L'ADMINISTRATION DE PRINCIPES ACTIFS
  申请人：NOVARTIS AG

  公开号：WO2014136086A1

  公开（公告）日：2014-09-12

  This invention provides for a compound of formula (I): or a pharmaceutically acceptable salt thereof, wherein R1–R4, L and X are defined herein. The compounds of formula (I) and pharmaceutically acceptable salts thereof are cationic lipids useful in the delivery of biologically active agents to cells and tissues.

  这项发明提供了一个式(I)的化合物，或其药用可接受的盐，其中R1-R4、L和X在此处被定义。式(I)的化合物及其药用可接受的盐是在将生物活性剂传递给细胞和组织中时有用的阳离子脂质。
• Enantioselective Total Synthesis of (−)-Acylfulvene and (−)-Irofulven
  作者：Dustin S. Siegel、Grazia Piizzi、Giovanni Piersanti、Mohammad Movassaghi

  DOI：10.1021/jo901926z

  日期：2009.12.18

  We report our full account of the enantioselective total synthesis of (−)-acylfulvene (1) and (−)-irofulven (2), which features metathesis reactions for the rapid assembly of the molecular framework of these antitumor agents. We discuss (1) the application of an Evans Cu-catalyzed aldol addition reaction using a strained cyclopropyl ketenethioacetal, (2) an efficient enyne ring-closing metathesis cascade

  我们报告了对 (-)-acylfulvene ( 1 ) 和 (-)-irofulven ( 2 )的对映选择性全合成的完整描述，其特征是复分解反应，用于快速组装这些抗肿瘤药物的分子框架。我们讨论了 (1) 使用应变环丙基烯酮硫缩醛的 Evans Cu 催化羟醛加成反应的应用，(2) 在具有挑战性的环境中有效的烯炔闭环复分解级联反应，(3) 用于后期阶段的试剂 IPNBSH还原烯丙基转座反应，和（4）的形成最终RCM /脱氢序列（ - ） - acylfulvene（1）和（ - ） - irofulven（2）。
• Discovery of Selective and Noncovalent Diaminopyrimidine-Based Inhibitors of Epidermal Growth Factor Receptor Containing the T790M Resistance Mutation
  作者：Emily J. Hanan、Charles Eigenbrot、Marian C. Bryan、Daniel J. Burdick、Bryan K. Chan、Yuan Chen、Jennafer Dotson、Robert A. Heald、Philip S. Jackson、Hank La、Michael D. Lainchbury、Shiva Malek、Hans E. Purkey、Gabriele Schaefer、Stephen Schmidt、Eileen M. Seward、Steve Sideris、Christine Tam、Shumei Wang、Siew Kuen Yeap、Ivana Yen、Jianping Yin、Christine Yu、Inna Zilberleyb、Timothy P. Heffron

  DOI：10.1021/jm501578n

  日期：2014.12.11

  we sought inhibitors of T790M-containing EGFR mutants with selectivity over wtEGFR. We describe the evolution of HTS hits derived from Jak2/Tyk2 inhibitors into selective EGFR inhibitors. X-ray crystal structures revealed two distinct binding modes and enabled the design of a selective series of novel diaminopyrimidine-based inhibitors with good potency against T790M-containing mutants of EGFR, high

  表皮生长因子受体（EGFR）激酶结构域内的激活突变，通常是L858R或外显子19内的缺失，增加了EGFR驱动的细胞增殖和存活，并与非小细胞肺癌患者对EGFR抑制剂埃洛替尼和吉非替尼的令人印象深刻的反应相关。大约60％的对这些药物的耐药性是由EGFR激酶结构域内的单个次级突变驱动的，特别是用蛋氨酸（T790M）替代了网守残基苏氨酸790。由于与抑制野生型EGFR（wtEGFR）有关的剂量限制性毒性，我们寻求了对T790M EGFR突变体具有抑制作用的抑制剂，其选择性优于wtEGFR。我们描述了来自Jak2 / Tyk2抑制剂的HTS命中进化为选择性EGFR抑制剂。