5-氟-7-氮杂吲哚-2-酮 | 1190314-85-2

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吡咯并吡啶类
• 中文名称: 5-氟-7-氮杂吲哚-2-酮
• 英文名称: 5-Fluoro-1H-pyrrolo[2,3-b]pyridin-2(3H)-one
• 英文别名: 5-fluoro-1,3-dihydropyrrolo[2,3-b]pyridin-2-one
• CAS: 1190314-85-2
• 化学式: C₇H₅FN₂O
• mdl: MFCD12962798
• 分子量: 152.128
• InChiKey: LXKVLRLIJKXICE-UHFFFAOYSA-N

物化性质

• 沸点：
  333.8±42.0 °C(Predicted)
• 密度：
  1.402±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.1
• 重原子数：
  11
• 可旋转键数：
  0
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.142
• 拓扑面积：
  42
• 氢给体数：
  1
• 氢受体数：
  3

安全信息

• 危险等级：
  IRRITANT
• WGK Germany：
  3
• 危险性防范说明：
  P261,P280,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H332,H335

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 5-Fluoro-1H-Pyrrolo[2,3-B]Pyridin-2(3H)-One
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 152,13 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid
breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  5-氟-7-氮杂吲哚-2-酮 、 N-(2-(二乙基氨基)乙基)-5-甲酰基-2,4-二甲基-1H-吡咯-3-甲酰胺 在 哌啶 作用下， 以 乙醇 为溶剂， 反应 3.0h， 生成 N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-2-oxo-1H-pyrrolo[2,3-b]pyridin-3-ylidene)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide
  参考文献：
  名称：

  Synthesis and antitumor activity of 5-(5-halogenated-2-oxo-1H-pyrrolo[2,3-b]pyridin-(3Z)-ylidenemethyl)-2,4-dimethyl-1H-pyrrole-3-carboxamides

  摘要：

  We report herein the design and synthesis of a series of novel 5-halogenated-7-azaindolin-2-one derivatives containing a 2,4-dimethylpyrrole moiety. Nine target compounds with >= 70% inhibition against MCF-7 at 30 mu M were further evaluated for their in vitro antitumor activity against seven human cancer cell lines by SRB assay. Results reveal that some compounds have potent antitumor activity, and the most active 13c7 (IC(50)s: 4.49-15.39 mu M) was found to be more active than Sunitinib (IC(50)s: 4.70 -> 30 mu M) against all of the tested cancer cell lines. (C) 2015 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.bmcl.2015.05.017

文献信息

• 7-氮杂吲哚啉-2-酮类化合物及其制备方法
  申请人：浙江司太立制药股份有限公司

  公开号：CN104876928B

  公开（公告）日：2016-09-14

  本发明涉及式(I)所示7‑氮杂吲哚啉‑2‑酮类化合物，其制备方法和医药用途以及以其为有效成分的抗肿瘤药物组合物。更具体地讲，本发明涉及的7‑氮杂吲哚啉‑2‑酮类化合物，其在母核的5‑位取代基是卤素，3‑位取代基是含有各种胺基甲酰基的2,4‑二甲基吡咯‑5‑亚甲基，其与同类抗肿瘤药物‑舒尼替尼相比，具有更加优越的抗肿瘤活性。
• Novel azulene-based derivatives as potent multi-receptor tyrosine kinase inhibitors
  作者：Chih-Hung Chen、On Lee、Chung-Niang Yao、Meng-Yun Chuang、Yow-Lone Chang、May-Hua Chang、Yen-Fang Wen、Wan-Hsu Yang、Ching-Huai Ko、Nien-Tzu Chou、Mai-Wei Lin、Chin-Pen Lai、Chung-Yuan Sun、Ling-mei Wang、Yen-Chun Chen、Tzong-Hsiung Hseu、Chia-Ni Chang、Hui-Chun Hsu、Hui-Chi Lin、Yu-Li Chang、Ying-Chu Shih、Shuen-Hsiang Chou、Yi-Ling Hsu、Hsiang-Wen Tseng、Chih-Peng Liu、Chia-Mu Tu、Tsan-Lin Hu、Yuan-Jang Tsai、Ting-Shou Chen、Chih-Lung Lin、Shu-Jiau Chiou、Chung-Cheng Liu、Chrong-Shiong Hwang

  DOI：10.1016/j.bmcl.2010.08.025

  日期：2010.10

  A series of azulene-based derivatives were synthesized as potent inhibitors for receptor tyrosine kinases such as FMS-like tyrosine kinase 3 (FLT-3). Systematic side chain modification of prototype 1a was carried out through SAR studies. Analogue 22 was identified from this series and found to be one of the most potent FLT-3 inhibitors, with good pharmaceutical properties, superior efficacy, and tolerability in a tumor xenograft model. (C) 2010 Elsevier Ltd. All rights reserved.
• Synthesis and antitumor activity of 5-(5-halogenated-2-oxo-1H-pyrrolo[2,3-b]pyridin-(3Z)-ylidenemethyl)-2,4-dimethyl-1H-pyrrole-3-carboxamides
  作者：Minghua Wang、Cheng Ye、Mingliang Liu、Zhaoyang Wu、Linhu Li、Chunlan Wang、Xiujun Liu、Huiyuan Guo

  DOI：10.1016/j.bmcl.2015.05.017

  日期：2015.7

  We report herein the design and synthesis of a series of novel 5-halogenated-7-azaindolin-2-one derivatives containing a 2,4-dimethylpyrrole moiety. Nine target compounds with >= 70% inhibition against MCF-7 at 30 mu M were further evaluated for their in vitro antitumor activity against seven human cancer cell lines by SRB assay. Results reveal that some compounds have potent antitumor activity, and the most active 13c7 (IC(50)s: 4.49-15.39 mu M) was found to be more active than Sunitinib (IC(50)s: 4.70 -> 30 mu M) against all of the tested cancer cell lines. (C) 2015 Elsevier Ltd. All rights reserved.