摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

rhodium antimonide

中文名称
——
中文别名
——
英文名称
rhodium antimonide
英文别名
——
rhodium antimonide化学式
CAS
——
化学式
RhSb
mdl
——
分子量
224.656
InChiKey
LGLWWGPTZNAXHA-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    -1.19
  • 重原子数:
    2.0
  • 可旋转键数:
    0.0
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    0.0
  • 拓扑面积:
    0.0
  • 氢给体数:
    0.0
  • 氢受体数:
    0.0

反应信息

  • 作为反应物:
    描述:
    Sm-monoantimoniderhodium antimonide 以 neat (no solvent, solid phase) 为溶剂, 生成
    参考文献:
    名称:
    三元稀土铑锑化物Ln6Rh30Sb19withLn= La-Nd、Sm和Eu
    摘要:
    通过在真空二氧化硅管中对由二元稀土和锑化铑与附加元素铑的化学计量混合物组成的冷压丸进行退火来制备六种标题化合物。它们的晶体结构是由 Eu6Rh30Sb19 单晶的四圆 X 射线衍射仪数据确定的,该单晶是从在高频炉中刚好低于熔化温度退火的电弧熔化样品中分离出来的。它是六边形的:P63/m,a = 1693.2(2) pm,c = 408.11(4) pm,Z = 1。最小二乘法细化导致 1259 个结构因子和 62 个可变参数的残差 R = 0.034。该结构在 63 轴周围显示出一些无序,但在其他方面与 Sc6Co30Si19 和 Yb6Co30P19 的结构非常相似,但与 U6Co30Si19 的结构不同。
    DOI:
    10.1002/zaac.200900230
  • 作为产物:
    描述:
    参考文献:
    名称:
    高温直接合成量热法某些 4d 和 5d 过渡金属锑化合物的标准生成焓
    摘要:
    热电材料具有通过回收许多过程的废热来节省能源的潜力。这些材料正在积极开发中,因此有必要了解这些系统的热力学和相平衡。在这项工作中,我们对一些不含有毒或极其稀有元素的热电合金进行了量热研究。一些二元 4d 和 5d 锑和过渡金属 (TM) 化合物的标准生成焓已通过高温直接合成量热法测量。报告的结果是:YSb (–124.7 ± 4.7);Y5Sb3 (–111.1 ± 3.2);Zr5Sb3 (–65.4 ± 3.2); RuSb2 (–16.8 ± 1.5); RhSb3 (–33.8 ± 2.1);Pd3Sb (–54.0 ± 2.7);Hf5Sb3 (–55.4 ± 3.0);OsSb2 (–7.4 ± 4.0); IrSb3 (–45.5 ± 2.5);PtSb2 (–53.2 ± 1.8),单位为 kJ/mol 原子。
    DOI:
    10.1134/s0036024420130142
点击查看最新优质反应信息

文献信息

  • Standard Enthalpies of Formation of Some 4d and 5d Transition Metal-Antimony Compounds by High Temperature Direct Synthesis Calorimetry
    作者:S. V. Meschel、Philip Nash
    DOI:10.1134/s0036024420130142
    日期:2020.12
    is necessary. In this work we have performed a calorimetric investigation of some thermoelectric alloys, which do not contain toxic or extremely rare elements. The standard enthalpies of formation of some binary 4d and 5d antimony and transition metal (TM) compounds have been measured by high temperature direct synthesis calorimetry. The reported results are: YSb (–124.7 ± 4.7); Y5Sb3 (–111.1 ± 3.2);
    热电材料具有通过回收许多过程的废热来节省能源的潜力。这些材料正在积极开发中,因此有必要了解这些系统的热力学和相平衡。在这项工作中,我们对一些不含有毒或极其稀有元素的热电合金进行了量热研究。一些二元 4d 和 5d 锑和过渡金属 (TM) 化合物的标准生成焓已通过高温直接合成量热法测量。报告的结果是:YSb (–124.7 ± 4.7);Y5Sb3 (–111.1 ± 3.2);Zr5Sb3 (–65.4 ± 3.2); RuSb2 (–16.8 ± 1.5); RhSb3 (–33.8 ± 2.1);Pd3Sb (–54.0 ± 2.7);Hf5Sb3 (–55.4 ± 3.0);OsSb2 (–7.4 ± 4.0); IrSb3 (–45.5 ± 2.5);PtSb2 (–53.2 ± 1.8),单位为 kJ/mol 原子。
  • Refinement of the Microwave‐Assisted Polyol Process for the Low‐Temperature Synthesis of Intermetallic Nanoparticles
    作者:Johannes Teichert、Martin Heise、Jen‐Hui Chang、Michael Ruck
    DOI:10.1002/ejic.201700966
    日期:2017.11.16
    potassium hydroxide, oleylamine, or oleic acid. Single-phase powders of a variety of intermetallic compounds were synthesized. Although not stable at the temperature of synthesis, high-temperature phases are accessible as well. The microwave-assisted polyol process opens up the possibility to synthesize intermetallic compounds in a fast and easily applicable one-step route, without the utilization of
    微波辅助多元醇工艺用于合成 TM 系统中金属间相的纯相微晶或纳米晶样品(T = Co、Ni、Rh、Pd、Ir、Pt 和 M = Sn、Sb、Pb、Bi )。反应温度范围在 240 °C 和 300 °C 之间,几分钟到一小时的反应时间就足够了。为优化合成反应温度、反应时间和金属前驱体。为了获得相纯样品,该过程通过添加氢氧化钾、油胺或油酸进一步改进。合成了多种金属间化合物的单相粉末。虽然在合成温度下不稳定,但也可以进入高温相。
  • Jeitschko, Wolfgang; Altmeyer, Rainer O., Zeitschrift fur Naturforschung, B: Chemical Sciences, <hi>1990</hi>, vol. 45, # 7, p. 947 - 951
    作者:Jeitschko, Wolfgang、Altmeyer, Rainer O.
    DOI:——
    日期:——
  • Ternary Rare Earth Rhodium Antimonides<i>Ln</i><sub>6</sub>Rh<sub>30</sub>Sb<sub>19</sub>with<i>Ln</i>= La-Nd, Sm, and Eu
    作者:Wolfgang Jeitschko、Rainer O. Altmeyer、Ute Ch. Rodewald
    DOI:10.1002/zaac.200900230
    日期:2009.8.31
    The six title compounds were prepared by annealing cold-pressed pellets consisting of stoichiometric mixtures of binary rare earth and rhodium antimonides with additional elemental rhodium in evacuated silica tubes. Their crystal structure was determined from four-circle X-ray diffractometer data of a Eu6Rh30Sb19 single crystal, which was isolated from an arc-melted sample annealed just below the melting
    通过在真空二氧化硅管中对由二元稀土和锑化铑与附加元素铑的化学计量混合物组成的冷压丸进行退火来制备六种标题化合物。它们的晶体结构是由 Eu6Rh30Sb19 单晶的四圆 X 射线衍射仪数据确定的,该单晶是从在高频炉中刚好低于熔化温度退火的电弧熔化样品中分离出来的。它是六边形的:P63/m,a = 1693.2(2) pm,c = 408.11(4) pm,Z = 1。最小二乘法细化导致 1259 个结构因子和 62 个可变参数的残差 R = 0.034。该结构在 63 轴周围显示出一些无序,但在其他方面与 Sc6Co30Si19 和 Yb6Co30P19 的结构非常相似,但与 U6Co30Si19 的结构不同。
  • Superconductivity in High-Entropy Antimonide M<sub>1–<i>x</i></sub>Pt<sub><i>x</i></sub>Sb (M = Equimolar Ru, Rh, Pd, and Ir)
    作者:Daigorou Hirai、Naoto Uematsu、Koh Saitoh、Naoyuki Katayama、Koshi Takenaka
    DOI:10.1021/acs.inorgchem.3c01364
    日期:2023.9.4
    conventional solid-state reaction and subsequent quenching. A detailed investigation of the composition and equilibration conditions confirmed the reversible phase transition between a multiphase state at low temperature and an entropy-driven single-phase solid solution at high temperatures. Electrical resistivity, magnetization, and heat capacity measurements of single-phase M1–xPtxSb (x = 0.2) samples revealed
    高熵概念应用于过渡金属锑化物 M 1– x Pt x Sb(M = 等摩尔 Ru、Rh、Pd 和 Ir)的合成。通过常规固相反应和随后的淬火,成功合成了具有P 6 3 / mmc空间群的准六方 NiAs 型晶体结构的高熵锑化物样品。对成分和平衡条件的详细研究证实了低温多相态与高温熵驱动单相固溶体之间的可逆相变。单相 M 1– x Pt x Sb ( x = 0.2) 样品的电阻率、磁化强度和热容测量揭示了 2.15(2) K 时的体超导转变。这项研究表明,高熵概念提供了许多机会发现超导体等新功能材料。
查看更多