1-哌啶-4-基丙醇 - CAS号 24152-48-5

物化性质

沸点：

227.9±13.0 °C(Predicted)
密度：

0.941±0.06 g/cm3(Predicted)

计算性质

辛醇/水分配系数(LogP)：

0.8
重原子数：

10
可旋转键数：

2
环数：

1.0
sp3杂化的碳原子比例：

1.0
拓扑面积：

32.3
氢给体数：

2
氢受体数：

2

安全信息

海关编码：

2933399090
WGK Germany：

3

SDS

SDS：a8e6fa560d5df4d9b5c47fcc145cb45f

查看

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 1-Piperidin-4-Ylpropan-1-Ol
: CBR00138
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
T Toxic R25
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Danger
Hazard statement(s)
Toxic if swallowed.
Precautionary statement(s)
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 143,23 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
1-Piperidin-4-Ylpropan-1-Ol
Acute Tox. 3; H301 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
1-Piperidin-4-Ylpropan-1-Ol
T, R25 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
No data available
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous
materials causing chronic effects
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 2811 IMDG: 2811 IATA: 2811
UN proper shipping name
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (1-Piperidin-4-Ylpropan-1-Ol)
IMDG: TOXIC SOLID, ORGANIC, N.O.S. (1-Piperidin-4-Ylpropan-1-Ol)
IATA: Toxic solid, organic, n.o.s. (1-Piperidin-4-Ylpropan-1-Ol)
Transport hazard class(es)
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

作为反应物：

描述：

1-哌啶-4-基丙醇在 N,N-二异丙基乙胺作用下，以二氯甲烷为溶剂，反应 4.0h，生成 1-(1-((2,3-dihydrobenzofuran-5-yl)sulfonyl)piperidin-4-yl)propyl methanesulfonate

参考文献：

名称：

VU6019650 的开发：一种用于治疗阿片类药物使用障碍的 M5 毒蕈碱型乙酰胆碱受体的强效、高选择性和全身活性正构拮抗剂

摘要：

毒蕈碱性乙酰胆碱受体 (mAChR) 亚型 5 (M 5 ) 代表了治疗多种成瘾性疾病（包括阿片类药物使用障碍）的新型潜在靶点。通过对几个功能性高通量筛选命中的化学优化，VU6019650 ( 27b ) 被确定为一种新型 M 5正构拮抗剂，具有高效力（人类 M 5 IC 50 = 36 nM）、M 5亚型选择性（对 100 倍以上的选择性） human M 1-4 ) 和在临床前成瘾模型中全身给药的有利物理化学特性。在急性脑切片电生理学研究中，27b阻断了非选择性毒蕈碱激动剂 oxotremorine-M 诱导的腹侧被盖区中脑多巴胺神经元神经元放电率的增加，这是中脑边缘多巴胺能奖励回路的一部分。此外，27b还在不损害一般运动输出的剂量范围内抑制雄性 Sprague-Dawley 大鼠的羟考酮自我给药。

DOI：

10.1021/acs.jmedchem.2c00192
作为产物：

描述：

4-丙酰吡啶以氯仿、溶剂黄146 为溶剂，生成 1-哌啶-4-基丙醇

参考文献：

名称：

Cardiac stimulating cyclic sulfonamido substituted

摘要：

一系列新型4-哌啶基-6,7-二甲氧基喹唑啉化合物，进一步取代在哌啶基上，以及其药学上可接受的盐，在哺乳动物中具有心脏刺激活性。它们在治疗或预防心脏疾病，特别是心力衰竭方面具有用途。

公开号：

US04542132A1

点击查看最新优质反应信息

文献信息

Heterocyclic derivatives

申请人：Zeneca Limited

公开号：US05556977A1

公开（公告）日：1996-09-17

Compounds of formula I ##STR1## and metabolically labile esters and amides thereof, and pharmaceutically acceptable salts thereof, in which R.sup.13, M.sup.2, X.sup.1, Z.sup.1, Z.sup.1a, X.sup.2 and A.sup.1 have the meanings given in the specification. The compounds are useful as inhibitors of the binding of fibrinogen to glycoprotein IIb/IIIa. Intermediates are also disclosed.

公式I的化合物及其代谢易降解的酯和酰胺，以及其药学上可接受的盐，其中R.sup.13，M.sup.2，X.sup.1，Z.sup.1，Z.sup.1a，X.sup.2和A.sup.1具有规范中给定的含义。这些化合物可用作抑制纤维蛋白原与糖蛋白IIb/IIIa结合的抑制剂。还披露了中间体。
Scalable and Straightforward Synthesis of All Isomeric (Cyclo)alkylpiperidines

作者：Andrii I. Subota、Anton O. Lutsenko、Bohdan V. Vashchenko、Dmitriy M. Volochnyuk、Vitalina Levchenko、Yurii V. Dmytriv、Eduard B. Rusanov、Alina O. Gorlova、Sergey V. Ryabukhin、Oleksandr O. Grygorenko

DOI：10.1002/ejoc.201900450

日期：2019.6.16

C‐3, or C‐4 positions of the piperidine ring based on the formal sp3–sp3 retrosynthetic disconnection is described. Catalytic hydrogenation of these adducts could be performed selectively for the synthesis of (cyclo)alkylpiperidines or the corresponding saturated amino alcohols on up to a 0.5 kg scale.

描述了一种基于形式上的sp 3 –sp 3逆合成断裂，在哌啶环的C-2，C-3或C-4位置引入（环）烷基取代基的有效方法。这些加合物的催化加氢可以选择性地进行，以合成（环）烷基哌啶或相应的饱和氨基醇，规模最大为0.5kg。
Heterocyclic compouds

申请人：Zeneca Limited

公开号：US05753659A1

公开（公告）日：1998-05-19

A compound of the general formula (M.sup.1).sub.n --Q--(M.sup.2).sub.1-n --L--A I wherein: n is 0 or 1; M.sup.1 is an amino group; Q is an aromatic heterocyclic group containing a basic nitrogen atom; M.sup.2 is an imino group; L is a template group; and A is an acidic group, or an ester or amide derivative thereof, or a sulphonamide group; and pharmaceutically acceptable salts and pro-drugs thereof, for use in the treatment of a disease in which platelet aggregation mediated by the binding of adhesion molecules to GPIIb-IIIa is involved. Novel compounds are also disclosed.

通式（M.sup.1).sub.n --Q--(M.sup.2).sub.1-n --L--A I的化合物，其中：n为0或1；M.sup.1为氨基；Q为含有碱性氮原子的芳香杂环基团；M.sup.2为亚胺基；L为模板基团；A为酸性基团，或其酯或酰胺衍生物，或磺酰胺基团；以及其药学上可接受的盐和前药，用于治疗通过粘附分子结合到GPIIb-IIIa介导的血小板聚集参与的疾病。还披露了新的化合物。
SUBSTITUTED THIAZOLIDINEDIONE INDAZOLES, INDOLES AND BENZOTRIAZOLES AS ESTROGEN-RELATED RECEPTOR-a MODULATORS

申请人：Bignan Gilles

公开号：US20110294780A1

公开（公告）日：2011-12-01

The present invention relates to compounds of Formula (I), methods for preparing these compounds, compositions, intermediates and derivatives thereof and for treating a condition including but not limited to ankylosing spondylitis, artherosclerosis, arthritis (such as rheumatoid arthritis, infectious arthritis, childhood arthritis, psoriatic arthritis, reactive arthritis), bone-related diseases (including those related to bone formation), breast cancer (including those unresponsive to anti-estrogen therapy), cardiovascular disorders, cartilage-related disease (such as cartilage injury/loss, cartilage degeneration, and those related to cartilage formation), chondrodysplasia, chondrosarcoma, chronic back injury, chronic bronchitis, chronic inflammatory airway disease, chronic obstructive pulmonary disease, diabetes, disorders of energy homeostasis, gout, pseudogout, lipid disorders, metabolic syndrome, multiple myeloma, obesity, osteoarthritis, osteogenesis imperfecta, osteolytic bone metastasis, osteomalacia, osteoporosis, Paget's disease, periodontal disease, polymyalgia rheumatica, Reiter's syndrome, repetitive stress injury, hyperglycemia, elevated blood glucose level, and insulin resistance.

本发明涉及式(I)的化合物，制备这些化合物的方法，组合物，中间体及其衍生物，并用于治疗包括但不限于强直性脊柱炎，动脉粥样硬化，关节炎（如类风湿关节炎，感染性关节炎，儿童关节炎，银屑病性关节炎，反应性关节炎），与骨相关的疾病（包括与骨形成有关的疾病），乳腺癌（包括对抗雌激素治疗无效的癌症），心血管疾病，软骨相关疾病（如软骨损伤/丧失，软骨退化以及与软骨形成有关的疾病），软骨发育不良，软骨肉瘤，慢性腰部损伤，慢性支气管炎，慢性炎症性气道疾病，慢性阻塞性肺疾病，糖尿病，能量稳态紊乱，痛风，假性痛风，脂质紊乱，代谢综合征，多发性骨髓瘤，肥胖，骨关节炎，遗传性骨发育不全，骨溶解性骨转移，软骨软化症，骨质疏松症，帕金森病，牙周病，多肌痛风，Reiter综合征，重复性应激损伤，高血糖，血糖水平升高和胰岛素抵抗等病症的方法。
PIPERAZINE COMPOUND CAPABLE OF INHIBITING PROSTAGLANDIN D SYNTHASE

申请人：Urade Yoshihiro

公开号：US20110319413A1

公开（公告）日：2011-12-29

This invention relates to a piperazine compound represented by Formula (I), wherein R 1 is C 1-6 alkyl; R 2 is hydroxy, C 1-6 alkyl that may have one or more substituents, —(C═O)—N(R 3 )(R 4 ), or —(C═O)—OR 5 ; R 3 and R 4 are the same or different, and each represents hydrogen or C 1-6 alkyl that may have one or more substituents, or R 3 and R 4 , taken together with a nitrogen atom to which R 3 and R 4 are attached, may form a saturated heterocyclic group; R 5 is hydrogen or C 1-6 alkyl that may have one or more substituents; and n is 1 or 2; or a salt thereof.

该发明涉及一种由式（I）表示的哌嗪化合物，其中R1是C1-6烷基；R2是羟基，可能具有一个或多个取代基的C1-6烷基，—(C═O)—N(R3)(R4)，或—(C═O)—OR5；R3和R4相同或不同，每个代表氢或可能具有一个或多个取代基的C1-6烷基，或R3和R4与R3和R4连接的氮原子一起，可能形成饱和杂环基团；R5是氢或可能具有一个或多个取代基的C1-6烷基；n为1或2；或其盐。

1-哌啶-4-基丙醇 | 24152-48-5

分子结构分类

物化性质

计算性质

安全信息

SDS

反应信息

文献信息

同类化合物

相关结构分类

热门分子