europium orthophosphate monohydrate | 14913-20-3

• 分子结构分类: 无机化合物 - 混合金属/非金属化合物 - 镧系含氧阴离子化合物
• 英文名称: europium orthophosphate monohydrate
• 英文别名: europium(III) phosphate monohydrate；europium(III) phosphate；europium phosphate*H2O；Europium(III) phosphate hydrate；europium(3+);phosphate;hydrate
• CAS: 14913-20-3
• 化学式: Eu*H₂O*O₄P
• 分子量: 264.947
• InChiKey: BOCFVANIXFYKBV-UHFFFAOYSA-K

计算性质

• 辛醇/水分配系数(LogP)：
  -3.65
• 重原子数：
  7
• 可旋转键数：
  0
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.0
• 拓扑面积：
  87.2
• 氢给体数：
  1
• 氢受体数：
  5

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : Europium phosphate
CAS-No. : 14913-20-3
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38 Irritating to eyes, respiratory system and skin.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37 Wear suitable protective clothing and gloves.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : EuO4P
Molecular Weight : 246,94 g/mol
Component Concentration
Europium phosphate
CAS-No. 14913-20-3 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Oxides of phosphorus, Europium/europium oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point not applicable
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. Causes respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. Causes skin irritation.
Eyes Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  europium orthophosphate monohydrate 以 neat (no solvent, solid phase) 为溶剂， 生成 europium(III) phosphate
  参考文献：
  名称：

  通过从磷酸溶液中结晶合成的镧系元素正磷酸盐的热分解

  摘要：

  摘要 沸腾磷酸结晶制备的镧系磷酸盐 LnPO4·H2O（Ln：La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu 和 Y）的热分解特性已提出解决方案。根据对 DTA 和 DTG 曲线观察到的影响，当加热到 1000 °C 时，磷酸盐可分为两组：（a）第一组包括六方（La→Tb）和正交 Dy 磷酸盐，（ b) 第二组由四方 (Ho→Lu) 和 Y 磷酸盐组成。组 (a) 的特征是两个低于 300 °C 的吸热线，与脱水有关，以及一个高于 700 °C 的放热线，与六方/斜方晶向单斜晶的转变有关。多晶型转变的温度随着镧系元素原子序数从 900 °C (Tb, Dy) 的增加而增加。（b）组在很宽的温度范围（100-600°C）内脱水，即使在 950°C 加热后仍保持四方晶体结构。然而，增加的结晶度、a 轴和 c 轴的收缩以及 IR 光谱的差异表明 (Ho→Lu)

  DOI：

  10.1016/s0040-6031(03)00085-6
• 作为产物：
  描述：

  磷酸 、 氯化铕(III) 在 HCl or HNO₃ 作用下， 以 further solvent(s) 为溶剂， 生成 europium orthophosphate monohydrate
  参考文献：
  名称：

  镧-mon独居石作为放射性废物存储陶瓷的制备和表征

  摘要：

  使用三种制备方法（直接法）以独居石或菱锰矿型结构制备了几种La 1 − x Gd x PO 4固溶体，以得到不同的x值。蒸发，在沙浴中或在高压釜中的密闭PTFE容器中合成）。rhabdophane型La中的样品1 - X的Gd X PO 4 · Ñ ħ 2 O（Ñ ≈ 0.5）在150制备℃下只对X ≥ 0.4。对于X ≤ 0.3，将固体沉淀为独居石型结构。这些结果通过纯稀土的研究得到了证实。磷酸盐在相同条件下合成。通过这些手段，良好结晶和MPO的单相样品4 · Ñ ħ 2 O（Ñ ≈ 0.5-1）在独居石（镧，铈），rhabdophane（钕，钐，铕，钆，铽，镝）或churchite （Ho，Er，Tm，Yb，Lu）的形式已准备好。

  DOI：

  10.1039/b212805p

文献信息

• Microwave approach for the synthesis of rhabdophane-type lanthanide orthophosphate (Ln = La, Ce, Nd, Sm, Eu, Gd and Tb) nanorods under solvothermal conditions
  作者：Chitta Ranjan Patra、Gabashvili Alexandra、Sujata Patra、David Solomon Jacob、Aharon Gedanken、Asher Landau、Yossi Gofer

  DOI：10.1039/b415693e

  日期：——

  Rhabdophane-type hexagonal lanthanide orthophosphate, LnPO4·nH2O (Ln = La, Ce, Nd, Sm, Eu, Gd and Tb, n = 0 to 0.6), and body-centered tetragonal ErPO4·nH2O nanowires/nanorods have been successfully synthesized in high yield (>95%) by simple microwave heating of an aqueous solution of Ln(III) nitrate and NH4H2PO4 in the pH range 1.8–2.2. The reaction was conducted in a simple domestic microwave oven. The structure, morphology, composition and physical properties of the as-prepared products have been characterized by powder X-ray diffraction, low resolution transmission electron microscopy, high resolution transmission electron microscopy, selected area electron diffraction, thermogravimetric analysis, differential scanning calorimetry, infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy. The length and width of the resulting lanthanide orthophosphate nanowires/nanorods are in the range 70–2200 nm and 6–130 nm, respectively. A possible mechanism for the formation of LnPO4·nH2O nanowires/nanorods is briefly discussed.

  通过对硝酸镧（III）和 NH4H2PO4 的水溶液在 pH 值为 1.8-2.2 的条件下进行简单的微波加热，成功合成了拉布多芬型六方镧系正磷酸盐 LnPO4-nH2O（Ln = La、Ce、Nd、Sm、Eu、Gd 和 Tb，n = 0 至 0.6）以及体心四边形 ErPO4-nH2O 纳米线/纳米棒，收率高达 95%以上。反应在一个简单的家用微波炉中进行。粉末 X 射线衍射、低分辨率透射电子显微镜、高分辨率透射电子显微镜、选区电子衍射、热重分析、差示扫描量热法、红外光谱、拉曼光谱、X 射线光电子能谱和光致发光光谱对制备产物的结构、形态、成分和物理性质进行了表征。所得正磷酸镧系元素纳米线/纳米棒的长度和宽度分别为 70-2200 纳米和 6-130 纳米。简要讨论了 LnPO4-nH2O 纳米线/纳米棒形成的可能机制。
• Fabrication and optical characterization of multimorphological nanostructured materials containing Eu(iii) in phosphate matrices for biomedical applications
  作者：T. T. Huong、L.T. Vinh、T. K. Anh、H. T. Khuyen、H. T. Phuong、L. Q. Minh

  DOI：10.1039/c3nj01206a

  日期：——

  EuPO4·H2O nanorods/nanoparticles with a rhabdophane-type hexagonal form have been successfully synthesized using microwave assisted co-precipitation. The effects of chemical composition and pH on the size, shape, morphology and luminescence properties have been investigated by powder X-ray diffraction, Field Emission Scanning Electron Microscopy (FESEM), and photoluminescence spectroscopy. The mean size of the nanorods is about 15–30 nm in diameter and 200–400 nm in length and the size of nanoparticles is 10–20 nm. A powdered sample of these EuPO4·H2O nanorods/nanoparticles emitted yellow-green light with narrow bands at 594, 619, 652, and 697 nm under UV-vis excitation. The surface effects of the built core–shell structure on the fluorescent properties, and the compatibility of the EuPO4·H2O nanomaterials with a biological system, have been studied to develop a new fluorescent label for biomedical imaging. The primary test results in using a EuPO4·H2O–Immunoglobulin G conjugate for recognizing the measles virus in a vaccine is presented.

  使用微波辅助共沉淀法成功合成了具有六方柱状结构的EuPO4·H2O纳米棒/纳米粒子。通过粉末X射线衍射、场发射扫描电子显微镜（FESEM）和光致发光光谱研究了化学成分和pH值对尺寸、形状、形态和发光特性的影响。纳米棒的平均直径约为15-30纳米，长度约为200-400纳米，纳米粒子的平均直径为10-20纳米。这些EuPO4·H2O纳米棒/纳米粒子的粉末样品在紫外-可见光激发下发出黄绿色窄带光，波长分别为594、619、652和697纳米。为了开发一种新的生物医学成像荧光标记，研究了构建的核壳结构对荧光特性的表面效应以及EuPO4·H2O纳米材料与生物系统的相容性。本文介绍了使用EuPO4·H2O-免疫球蛋白G共轭物识别疫苗中麻疹病毒的主要测试结果。
• Determination of the Solubility of Rhabdophanes LnPO₄·0.667H₂O (Ln = La to Dy)
  作者：Clémence Gausse、Stéphanie Szenknect、Dan Wen Qin、Adel Mesbah、Nicolas Clavier、Stefan Neumeier、Dirk Bosbach、Nicolas Dacheux

  DOI：10.1002/ejic.201600517

  日期：2016.10

  systematic study of the solubility of the rhabdophanes LnPO4·0.667H2O (Ln = La–Dy) was performed through oversaturation and undersaturation experiments at different temperatures (298–363 K) to demonstrate the reversibility of the equilibria. The structure of the neoformed phase was controlled carefully over the entire temperature range to enable the unambiguous attribution of the solubility products and the

  通过在不同温度 (298–363 K) 下的过饱和和欠饱和实验，对弹状体 LnPO4·0.667H2O (Ln = La–Dy) 的溶解度进行了系统研究，以证明平衡的可逆性。在整个温度范围内仔细控制新形成相的结构，以使溶度积和衍生的热力学数据明确归属于弹状体相。LnPO4·0.667H2O 的 log K°s,0 (298 K) 值范围从 –25.6 ± 0.8 (Pr) 到 –24.9 ± 1.7 (Eu)，最小值为 Pr 至 Sm，而 ΔfG° 值298 K 在 (–1984 ± 2) 和 (–2004 ± 2) kJ mol–1 之间变化，无论考虑哪种镧系元素，除了 Eu-rhabdophane，它呈现出最高的吉布斯形成能量 [(–1896 ± 2) kJ mol–1]。
• Selective precipitation of rare earth orthophosphates with hydrogen peroxide from phosphoric acid solutions
  作者：L. S. Skogareva、S. Yu. Kottsov、T. O. Shekunova、A. E. Baranchikov、O. S. Ivanova、A. D. Yapryntsev、V. K. Ivanov

  DOI：10.1134/s0036023617090157

  日期：2017.9

  It has been shown for the first time that the use of hydrogen peroxide allows precipitation of rare earth orthophosphates (La-Tb) from phosphoric acid solutions at temperatures below 100 degrees C. Either anhydrous or hydrated orthophosphates with monazite or rhabdophane structure, respectively, can be obtained depending on rare earth element position in lanthanide series and precipitation conditions (orthophosphoric acid and hydrogen peroxide concentration). Hydrated orthophosphates with rhabdophane structure can be prepared by precipitation with hydrogen peroxide for all studied rare earth elements.
• Thermochemistry of hydrated rare earth orthophosphates
  作者：I. Horváth、I. A. Bondar、L. P. Mezentseva

  DOI：10.1007/bf02138583

  日期：1988.9