摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

B2H5(μ-NHtBu) | 37001-31-3

中文名称
——
中文别名
——
英文名称
B2H5(μ-NHtBu)
英文别名
μ-tert-butylaminodiborane;μ-t-butylaminoborane(6);B2H5(μ-NH(t)Bu)
B2H5(μ-NHtBu)化学式
CAS
37001-31-3
化学式
C4H15B2N
mdl
——
分子量
98.7918
InChiKey
BCFMUUUSKYEPFX-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    None
  • 重原子数:
    None
  • 可旋转键数:
    None
  • 环数:
    None
  • sp3杂化的碳原子比例:
    None
  • 拓扑面积:
    None
  • 氢给体数:
    None
  • 氢受体数:
    None

反应信息

  • 作为反应物:
    描述:
    B2H5(μ-NHtBu)1,3-双(2,6-二异丙基苯基)咪唑-2-烯四氢呋喃正己烷 为溶剂, 反应 48.0h, 以61%的产率得到
    参考文献:
    名称:
    Metal-free dehydrogenation of amine–boranes by an N-heterocyclic carbene
    摘要:
    使用大体积 N-杂环卡宾 IPr (IPr = [(HCNDipp)C:]; Dipp = 2,6 研究了伯胺和仲胺硼烷(RNH2·BH3 和 R2NH·BH3;R = 烷基)的脱氢-iPr2C6H3) 作为化学计量脱氢剂。在伯胺-硼烷的情况下,得到卡宾结合的加合物IPr·BH2-NH(R)-BH3来代替所需的聚合物[RNH-BH2]n。仲胺硼烷 iPr2NH·BH3 参与与 IPr 的脱氢化学反应,得到氨基硼烷 [iPr2NBH2] 和二氢胺醛 IPrH2 作为产物。尝试诱导从芳基胺硼烷 DippNH2·BH3 中消除 H2,得到了含有已知物质 IPr·BH2NHDipp、IPr·BH2NH(Dipp)·BH3、游离 DippNH2 和 IPrH2 的反应混合物。新的受阻芳基胺硼烷加合物 Ar*NH2·BH3 [Ar* = 2,6-(Ph2CH)2-4-MeC6H2] 与 IPr 发生反应,得到 IPr·BH3 和游离 Ar*NH2,这与存在一致相对于其受阻较少的胺硼烷类似物,Ar*NH2·BH3 中的 N–B 配位键较弱。
    DOI:
    10.1039/c3dt32988g
  • 作为产物:
    描述:
    borane tert-butylamine 以 not given 为溶剂, 生成 B2H5(μ-NHtBu)
    参考文献:
    名称:
    Studies of boron-Nitrogen Compounds. VIII.1 Nuclear Magnetic Resonance Studies of Some μ-Aminodiboranes and Amine Boranes
    摘要:
    DOI:
    10.1021/ja01062a011
点击查看最新优质反应信息

文献信息

  • Dehydrocoupling Reactions of Borane−Secondary and −Primary Amine Adducts Catalyzed by Group-6 Carbonyl Complexes: Formation of Aminoboranes and Borazines
    作者:Yasuro Kawano、Mikio Uruichi、Mamoru Shimoi、Seitaro Taki、Takayuki Kawaguchi、Taeko Kakizawa、Hiroshi Ogino
    DOI:10.1021/ja904918u
    日期:2009.10.21
    solution of BH(3).NHR(2) (1a: R = Me, 1b: R = 1/2C(4)H(8), 1c: R = 1/2C(5)H(10), 1f: R = Et) containing a catalytic amount of a group-6 metal carbonyl complex, [M(CO)(6)] (M = Cr, Mo, W), led to dehydrogenative B-N covalent bond formation to produce aminoborane dimers, [BH(2)NR(2)](2) (2a-c, f), in high yield. During these reactions a borane sigma complex, [M(CO)(5)(eta(1)-BH(3).NHR(2))] (3), was detected
    BH(3).NHR(2) 溶液的光辐照 (1a: R = Me, 1b: R = 1/2C(4)H(8), 1c: R = 1/2C(5)H(10) , 1f: R = Et) 含有催化量的第 6 族属羰基络合物 [M(CO)(6)] (M = Cr, Mo, W),导致脱氢 BN 共价键形成以产生硼烷二聚体, [BH(2)NR(2)](2) (2a-c, f),产量高。在这些反应中硼烷西格玛复合物,[M(CO)(5)(eta(1)-BH(3).NHR(2))] (3),被核磁共振波谱检测到。体积较大的胺硼烷、BH(3).NH(i)Pr(2) (1d) 和 BH(3).NHCy(2) (1e, Cy = cyclo-C(6)H(11)) 的类似催化脱氢,得到单体产物 BH(2) 平线 NR(2) (4d, e)。通过DFT计算研究了脱氢偶联的反应机理。在计算研究的基础上,我们建议催
  • Donor–Acceptor Complexation and Dehydrogenation Chemistry of Aminoboranes
    作者:Adam C. Malcolm、Kyle J. Sabourin、Robert McDonald、Michael J. Ferguson、Eric Rivard
    DOI:10.1021/ic3018997
    日期:2012.12.3
    donor–acceptor adducts of aminoborane (H2BNH2) and its N-substituted analogues (H2BNRR′) were prepared: LB-H2BNRR′2-BH3 (LB = DMAP, IPr, IPrCH2 and PCy3; R and R′ = H, Me or tBu; IPr = [(HCNDipp)2C:] and Dipp = 2,6-iPr2C6H3). To potentially access complexes of molecular boron nitride, LB-BN-LA (LA = Lewis acid), preliminary dehydrogenation chemistry involving the parent aminoborane adducts LB-H2BNH2-BH3
    一系列硼烷的正式供体-受体加合物(H 2 BNH 2)和它的N-取代的类似物(H 2 BNRR')中制备:LB-H 2 BNRR' 2 -BH 3(LB = DMAP,IPR,IPrCH 2和PCy 3; R和R'= H,Me或t Bu; IPr = [(HCNDipp)2 C:]和Dipp = 2,6- i Pr 2 C 6 H 3)。为了潜在地获得分子氮化硼LB-BN-LALA = Lewis酸)的配合物,涉及母体硼烷加合物LB-H 2 BNH 2 -BH的初步脱氢化学3使用的[Rh(COD)CL]进行了研究2,CuBr和NIBR 2作为脱氢催化剂。代替分离预期的脱氢BN供体-受体配合物,嗪的形成被认为是主要产物。还描述了制备代芳基硼烷封端的硼烷络合物LB-H 2 BNH 2 -B(C 6 F 5)3的尝试。
  • Coordination of aminoborane, NH2BH2, dictates selectivity and extent of H2 release in metal-catalysed ammonia borane dehydrogenation
    作者:Vincent Pons、R. Tom Baker、Nathaniel K. Szymczak、David J. Heldebrant、John C. Linehan、Myrna H. Matus、Daniel J. Grant、David A. Dixon
    DOI:10.1039/b809190k
    日期:——
    In situ 11 B NMR monitoring, computational modeling, and external trapping studies show that selectivity and extent of H2 release in metal-catalysed dehydrogenation of ammonia borane, NH3BH3, are determined by coordination of reactive aminoborane, NH2BH2, to the metal center.
    原位 11 B NMR 监测、计算建模和外部捕获研究表明,在属催化的硼烷 NH3BH3 脱氢反应中,H2 的选择性和释放程度取决于活性硼烷 NH2BH2 与属中心的配位。
  • Thermally Induced Dehydrogenation of Amine–Borane Adducts and Ammonia–Borane by Group 6 Cyclopentadienyl Complexes Having Single and Triple ­Metal–Metal Bonds
    作者:Daniel García‐Vivó、Estefanía Huergo、Miguel A. Ruiz、Raquel Travieso‐Puente
    DOI:10.1002/ejic.201300629
    日期:2013.10
    were, in all cases, borazine, [HNBH]3, and polyborazylene, [NBHx] (x < 1), whereas other minor products were derived from B–N bond-cleavage processes. Over the course of these reactions, complexes 1a–c were transformed into the corresponding mononuclear hydrides [MCpH(CO)3] [M = Cr (2a), Mo (2b), W (2c)], which are supposed to be the catalytically active species in these processes, as also supported by
    用催化量 (5 mol-%) 的单键二聚体 [M2Cp2(CO)6] [M = Cr (1a), Mo (1b), W ( 1c);Cp = 环戊二烯基] 在温和的热活化 (333 K) 下导致加合物逐步脱氢,并分别在 12、24 和 >34 小时后实现定量转化。在这些反应的初始阶段(低转化率),主要产物是硼烷(NH2=BH2)的环状和支链低聚物。然而,在更长的反应时间(高转化率)下,在所有情况下,主要产物是环氮烷 [HNBH]3 和聚氮烷 [NBHx] (x < 1),而其他次要产物来自 B-N 键- 裂解过程。在这些反应过程中,配合物 1a-c 被转化为相应的单核氢化物 [MCpH(CO)3] [M = Cr (2a), Mo (2b), W (2c)],它们被认为是这些过程中的催化活性物质,也得到了二氢化物纯样品 [Mo2Cp2(H)2(μ-Ph2PCH2PPh2)(CO)2]
  • Reaction of substituted lithium amides with diborane
    作者:Lawrence D. Schwartz、Philip C. Keller
    DOI:10.1021/ja00764a021
    日期:1972.5
查看更多