bis(2-{[4-(but-3-enyl)oxyphenylimino]methyl}-4,6-di-tert-butylphenoxy) titanium(IV) dichloride | 1404461-02-4

• 英文名称: bis(2-{[4-(but-3-enyl)oxyphenylimino]methyl}-4,6-di-tert-butylphenoxy) titanium(IV) dichloride
• 英文别名: bis{2-{[4-(but-3-enyloxy)phenylimino]methyl}-4,6-di-tert-butylphenoxy}titanium(IV) dichloride
• CAS: 1404461-02-4
• 化学式: C₅₀H₆₄Cl₂N₂O₄Ti
• 分子量: 875.855
• InChiKey: UAKHUKMUHFLKLW-ZRSVAGEDSA-J

计算性质

• 辛醇/水分配系数(LogP)：
  None
• 重原子数：
  None
• 可旋转键数：
  None
• 环数：
  None
• sp3杂化的碳原子比例：
  None
• 拓扑面积：
  None
• 氢给体数：
  None
• 氢受体数：
  None

反应信息

• 作为产物：
  描述：

  3,5-二叔丁基水杨醛 在 三乙胺 作用下， 以 甲醇 、 二氯甲烷 、 甲苯 为溶剂， 反应 24.0h， 生成 bis(2-{[4-(but-3-enyl)oxyphenylimino]methyl}-4,6-di-tert-butylphenoxy) titanium(IV) dichloride
  参考文献：
  名称：

  芳烃型芳烃型后茂金属催化体系的设计：XV。含有丁-3-烯氧基的（N-芳基）水杨醛亚胺配体的合成及其与二氯化钛（IV）的配合物

  摘要：

  一系列的（ñ -芳基）水杨醛二胺通过水杨醛在位置取代反应合成3和5由笨重叔丁基或α枯基与盐酸的ø - ，间- ，和p - （丁-3-三乙胺存在下的苯氧基）苯胺。通过与二氯化钛（IV）L 2 TiCl 2的TiCl 2（OPr- i）2配合物反应形成了所获得的化合物。

  DOI：

  10.1134/s1070428013080095

文献信息

• Multicentered self-immobilized ethylene polymerization catalysts based on functionalized titanium halide salicylaldiminate complexes for the synthesis of ultra-high-molecular-weight polyethylene
  作者：N. I. Ivancheva、S. Ya. Khaikin、E. V. Sviridova、S. P. Fedorov、D. V. Sanieva、O. V. Molev、I. V. Oleinik、S. S. Ivanchev

  DOI：10.1134/s1070427212090170

  日期：2012.9

  Specific features of ethylene polymerization using a new group of catalytic systems based on ten methylalumoxane-activated titanium halide salicylaldiminato complexes functionalized with omega-vinylalkoxy groups and containing tert-butyl substituents in the phenoxide moiety were studied. The catalytic activity of the new group of activated complexes is strongly affected by the position of the omega-vinylalkoxy functional group and by the number and position of substituents in the phenoxide moiety. These factors determine the ratio of the homogeneous and heterogeneous steps of the polymerization as a result of the catalyst self-immobilization onto the polymer formed, and also the molecular characteristics of the polymer obtained at 20, 40, and 60 degrees C and ethylene pressure of 0.4 MPa. The possibility and conditions of preparing ultra-high-molecular-weight polyethylene with improved morphology were revealed.