摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

Re2(CO)9(PMe2Ph) | 101311-29-9

中文名称
——
中文别名
——
英文名称
Re2(CO)9(PMe2Ph)
英文别名
——
Re2(CO)9(PMe2Ph)化学式
CAS
101311-29-9;135682-05-2;32025-95-9
化学式
C17H11O9PRe2
mdl
——
分子量
762.657
InChiKey
ABRXZIBRNVWZGV-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    None
  • 重原子数:
    None
  • 可旋转键数:
    None
  • 环数:
    None
  • sp3杂化的碳原子比例:
    None
  • 拓扑面积:
    None
  • 氢给体数:
    None
  • 氢受体数:
    None

反应信息

  • 作为反应物:
    描述:
    Re2(CO)9(PMe2Ph)二甲基苯基磷十二/十四烷基二甲基氧化胺 作用下, 以 氯仿 为溶剂, 生成 Re2(CO)8(PMe2Ph)2
    参考文献:
    名称:
    Oxygen Atom Transfer Reactions to Metal Carbonyls: Kinetics and Mechanism of CO Substitution Reactions of M2(CO)9L (M = Re, L = PPh3, PMePh2, PMe2Ph, C5H5N, or M = Mn, L = C5H5N) in the Presence of (CH3)3NO
    摘要:
    Rates for the reactions of M-2(CO)(9)L (M = Re, L = PPh3, PMePh2, PMe2Ph, C5H5N or M = Mn, L = C5H5N) with L in the presence of (CH3)(3)NO as O-atom transfer reagent and CHCl3 as solvent are reported. The reaction rates suggest a pathway of association (k(2)). The reaction rate order of Re-2(CO)(9)L with the four ligands is as follows: PPh3 > PMePh2 > PMe2Ph > C5H5N.
    DOI:
    10.1081/sim-120039265
  • 作为产物:
    参考文献:
    名称:
    Oxygen Atom Transfer Reactions to Metal Carbonyls: Kinetics and Mechanism of CO Substitution Reactions of M2(CO)9L (M = Re, L = PPh3, PMePh2, PMe2Ph, C5H5N, or M = Mn, L = C5H5N) in the Presence of (CH3)3NO
    摘要:
    Rates for the reactions of M-2(CO)(9)L (M = Re, L = PPh3, PMePh2, PMe2Ph, C5H5N or M = Mn, L = C5H5N) with L in the presence of (CH3)(3)NO as O-atom transfer reagent and CHCl3 as solvent are reported. The reaction rates suggest a pathway of association (k(2)). The reaction rate order of Re-2(CO)(9)L with the four ligands is as follows: PPh3 > PMePh2 > PMe2Ph > C5H5N.
    DOI:
    10.1081/sim-120039265
点击查看最新优质反应信息

文献信息

  • The palladium-catalysed reaction between [Re2(CO)10] and phosphines and the crystal and molecular structure of diaxial [Re2(CO)8(PMe2Ph)2]
    作者:Gillian W. Harris、Jan C. A. Boeyens、Neil J. Coville
    DOI:10.1039/dt9850002277
    日期:——
    [Re2(CO)10] and PR3[PR3= PPh3, PMePh2, PMe2Ph, PMe3, P(CH2Ph)3, or P(OMe)3] in xylene is catalysed by Pd/C, Pd/CaCO3, and PdO and yields the complexes [Re2(CO)10–n(PR3)n](n=1 or 2) as the major products (15–80%). Attempts to synthesise [Re2(CO)10–n(PR3)n] from [Re2(CO)10] and PR3in the presence of NMe3O under milder conditions (e.g. refluxing CH2Cl2) also gave the above products with n=1 or 2 as well
    催化二甲苯中[Re 2(CO)10 ]与PR 3 [PR 3 = PPh 3,PMePh 2,PMe 2 Ph,PMe 3,P(CH 2 Ph)3或P(OMe)3 ]之间的反应通过Pd / C,Pd / CaCO 3和PdO的分离得到主要化合物(Re 2(CO)10– n(PR 3)n ](n = 1或2)(15–80%)。尝试合成[Re 2(CO)10– n(PR 3)n在较温和的条件下(例如回流CH 2 Cl 2),在NMe 3 O存在下,从[Re 2(CO)10 ]和PR 3中得到的化合物,上述产物的n = 1或2以及fac的高收率[ReCl(CO)3(PR 3)2 ]。进行了双轴[Re 2(CO)8(PMe 2 Ph)2 ]的X射线晶体结构测定:空间群C 2 / c,Z = 4,a = 22.779(9),b= 7.1 66(3),c= 17.249(7),,β= 95.13(3)°,R=
  • Adams; Falloon, Organometallics, 1995, vol. 14, # 4, p. 1748 - 1755
    作者:Adams、Falloon
    DOI:——
    日期:——
  • Studies of the Insertion of an Organic Isothiocyanate into a Rhenium−Rhenium Single Bond and a New Mode of Metal-Promoted Coupling of Isothiocyanates
    作者:Richard D. Adams、Mingsheng Huang
    DOI:10.1021/om950675o
    日期:1996.8.20
    Five new compounds were obtained from the reaction of Re-2(CO)(9)(MeCN) with EtO(2)-CN=C=S in a hexane solution at reflux (68 degrees C), These were identified as Re(CO)(4)[s-trans-mu-C,S-EtO(2)CN=CS]Re(CO)(5) (2, 7% yield), Re(CO)(4)[mu-C,S,N-EtO(2)CN=CS]Re(CO)(4) (3, 40% yield), Re(CO)(4)[mu-C,N,S-2-(EtO(2)C)(2)NC=NCS2]Re(CO)(4) (4, 17% yield), Re(CO)(4)[mu-C,N,S-2-(EtO(2)C)(2)NC=NCS2]Re(Co)(3)(NCMe) (5, 5% yield), and trace Re(CO)(4)[-C,N,S-2-(EtO(2)C)(H)-NC=NCS2]Re(CO)(4) (6), All five products have been characterized crystallographically. Compounds 2 and 3 can be described as dimetalated thioimidate complexes formed by the insertion of one EtO(2)CN=C=S molecule into the Re-Re bond of 1. Compounds 4 and 5 contain a (EtO(2)C)(2)NC=NCS2 ligand that was formed by the insertion and rearrangement of two isothiocyanate molecules in the Re-Re bond of 1. Compound 6 is similar to 5 but contains a bridging (EtO(2)C)(H)NC=NCS2 ligand instead. The reaction of Re(CO)(4)(PMe(2)Ph)Re(CO)(4)(NCMe) with EtO(2)CN=C=S yielded two isomeric products, trans-Re(CO)(4)(PMe(2)Ph)[mu-(EtO(2)C)N=CN(CO(2)Et)CS2]Re(CO)(4) (8) and cis-Re(CO)(4)(PMe(2)Ph)[mu-EtO(2)C)N=CN(CO(2)Et)CS2]Re(CO)(4) (9), plus a small amount of the dimetalated thioimidate compound Re-2(CO)(8)(PPhMe(2))(mu-EtO(2)CNCS) (10). Compounds 8 and 9 contain a bridging (EtO(2)C)N=CN(CO(2)Et)CS2 ligand that was also formed by the coupling and rearrangement of two isothiocyanate molecules, This ligand is considered to be an intermediate en route to the (EtO(2)C)(2)NC=NCS2 ligand as found in 4, since 8 and 9 can be transformed into the complex Re(CO)(4)[mu-C,N,S-2-(EtO(2)C)(2)NC=NCS2]Re(CO)(3)(PMe(2)Ph) (11), a phosphine derivative of 4, A small amount of the complex Re(CO)(3)(PPhMe(2))(mu-S2C=NCO(2)Et)Re(CO)(3)(PPhMe(2)) (12) was also formed from 8 and 9. Compound 12 contains a dithiocarbimato ligand in a novel tetradentate bridging coordination mode, A mechanism for the formation of the (EtO(2)C)(2)-NC=NCS2 ligand is presented and discussed.
查看更多