Material Safety Data Sheet Section 1. Identification of the substance Product Name: 1-(4-Thiazolyl)-ethanone Synonyms: Section 2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section 3. Composition/information on ingredients. Ingredient name: 1-(4-Thiazolyl)-ethanone CAS number: 38205-66-2 Section 4. First aid measures Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section 5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section 6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution: Wear approved mask/respirator Hand precaution: Wear suitable gloves/gauntlets Skin protection: Wear suitable protective clothing Eye protection: Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section 7. Handling and storage Handling: This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels. Storage: Section 8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section 9. Physical and chemical properties Appearance: Not specified Boiling point: No data No data Melting point: Flash point: No data Density: No data Molecular formula: C5H5NOS Molecular weight: 127.2 Section 10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, sulfur oxides. Section 11. Toxicological information No data. Section 12. Ecological information No data. Section 13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section 14. Transportation information Non-harzardous for air and ground transportation. Section 15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.
Catalytic Enantioselective Direct Aldol Addition of Aryl Ketones to α‐Fluorinated Ketones
作者:Connor J. Thomson、David M. Barber、Darren J. Dixon
DOI:10.1002/anie.201916129
日期:2020.3.23
catalytic enantioselective synthesis of α-fluorinated chiral tertiary alcohols from (hetero)aryl methyl ketones is described. The use of a bifunctional iminophosphorane (BIMP) superbase was found to facilitate direct aldol addition by providing the strong Brønsted basicity required for rapid aryl enolate formation. The new synthetic protocol is easy to perform and tolerates a broad range of functionalities
描述了由(杂)芳基甲基酮催化合成α-氟化手性叔醇的对映体。发现使用双功能亚氨基正膦(BIMP)超碱可通过提供快速形成芳基烯醇酸酯所需的强布朗斯台德碱度,促进直接添加羟醛。新的合成方案易于执行,并具有高对映选择性(高达> 99:1 er),可耐受各种功能和杂环。已经证明了多克的可扩展性以及催化剂的回收和再循环。1 H NMR研究表明,与现有技术水平的催化体系相比,BIMP催化的速率提高了1400倍。通过合成各种对映体丰富的结构单元和杂环,突出了醛醇产品的实用性,其中包括:
Direct Enamido C(sp<sup>2</sup>)−H Diphosphorylation Enabled by a PCET‐Triggered Double Radical Relay: Access to<i>gem</i>‐Bisphosphonates
作者:Hao‐Qiang Cao、Hao‐Nan Liu、Zhe‐Yuan Liu、Bao‐Kun Qiao、Fa‐Guang Zhang、Jun‐An Ma
DOI:10.1002/chem.202000517
日期:2020.4.24
electron-transfer (PCET)-triggered enamidoC(sp2 )-Hdiphosphorylation. This reaction represents a rare example of realizing the challenging double C-P bond formation at a single carbon atom, thus providing facile access to a broad variety of structurally diverse bisphosphonates from simple enamides under silver-mediated conditions. Initial mechanistic studies demonstrated that the diphosphorylation involves
[EN] SUBSTITUTED IMIDAZOLE CARBOXAMIDES AND THEIR USE IN THE TREATMENT OF MEDICAL DISORDERS<br/>[FR] IMIDAZOLE CARBOXAMIDES SUBSTITUÉS ET LEUR UTILISATION DANS LE TRAITEMENT DE TROUBLES MÉDICAUX
申请人:BIAL BIOTECH INVEST INC
公开号:WO2021055612A1
公开(公告)日:2021-03-25
The invention provides substituted imidazole carboxamides and related compounds, compositions containing such compounds, medical kits, and methods for using such compounds and compositions to treat a medical disorder, e.g., cancer, lysosomal storage disorder, neurodegenerative disorder, inflammatory disorder, in a patient.
[EN] PYRIMIDINYL-PYRIDYLOXY-NAPHTHYL COMPOUNDS AND METHODS OF TREATING IRE1-RELATED DISEASES AND DISORDERS<br/>[FR] COMPOSÉS PYRIMIDINYL-PYRIDYLOXY-NAPHTYLE ET PROCÉDÉS DE TRAITEMENT DE MALADIES ET DE TROUBLES LIÉS À IRE1
申请人:GENENTECH INC
公开号:WO2018166528A1
公开(公告)日:2018-09-20
Described herein are pyrimidinyl-pyridyloxy-naphthyl compounds with inositol requiring enzyme 1 (IRE1) modulation activity or function having the Formula (I) or (I') structure : or stereoisomers, tautomers, or pharmaceutically acceptable salts thereof, and with the substituents and structural features described herein. Also described are pharmaceutical compositions and medicaments that include the Formula (I) or (I') compounds, as well as methods of using such IRE1 modulators, alone and in combination with other therapeutic agents, for treating diseases or conditions that are mediated or dependent upon estrogen receptors.